Mc-12Hd Set Record Input; Mc-12Hd Set Zone2 Volume - Lexicon MC-12HD Protocol Manual

Lexicon

7.3.26 MC-12HD Set Record Input

Sets the Record input.
7.3.26.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
7.3.26.2 Data Description
InputId:
Data Type: Unsigned 8 bit Integer
Description/Conversion:
7.3.26.3 MC-12HD Response:
If the Input Id is a valid MC-12HD input then the MC-12HD will make the requested Input the active
record input.
7.3.26.4 Data Validation:
The InputId must be a valid Input Id. If it is not the MC-12HD will respond with a NAK packet and error
code DC_INVALID_INPUT. If the input is assigned the MC-12HD will respond with an ACK Packet.

7.3.27 MC-12HD Set Zone2 Volume

Commands MC-12HD to set the Zone 2 volume to the value in this packet.
7.3.27.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
7.3.27.2 Data Description
Value:
Data Type: Signed 8 bit integer (2's compliment)
Max: +12 (0x0C) (12dB)
Min: -80 (0xB0) (-80 dB)
7.3.27.3 MC-12HD Response
The MC-12HD will assign the value from the packet to the Zone 2 volume.
7.3.27.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the MC-12HD will ignore the
command and transmit a NAK command with an error code DC_INVALID_DATA.
MC_CMD_SET_REC_INPUT
1
InputId
Appendix D MC-12HD Input Ids
MC_CMD_SET_ZONE2_VOLUME
1
Value
MC-12HD Serial Communications Protocol
0x44
0x01
nn
0x45
0x01
nn
32