2
4
5
Your Phone
1 Voicemail indicator
8 Redial; Transfer
2 DDI soft keys
9 Speakerphone
3 Feature Softkeys
4 Navigation cluster
5 Volume
6 Headse; Mute
7 Voicemail; Hold
Copyright © 2018 CallSwitch.net. All rights reserved.
Copyright © 2018 CallSwitch.net. All rights reserved.
Feature Buttons
Use feature softkeys to view calls and access features
such as Call Log. Use the Direct Dial soft keys (DDI's) to
call the contacts on the Directory.
Buttons illuminate to indicate status:
Green, steady: active
•
•
Green, flashing: incoming call
Red, steady: line in use
•
•
Red, flashing: internal extension incoming call
CISCO IP PHONE 8851
CISCO IP PHONE 8851
YEALINK SIP-T41S
YEALINK SIP-T46S
Make a Call
1
1. Pick up the handset.
2. Enter a number, and then press the Send soft key.
Answer a Call
Pick up the handset.
Using the speakerphone, press
3
Put a Call on Hold
Press
or the Hold soft key during an active call.
6
To resume a held call, press
7
8
View Your Recent Calls
1. Press the History soft key when the phone is idle,
9
press
or
to scroll through the list.
2. Select an entry from the list, you can do the following:
Press the
Send
soft key to place a call.
Press the
soft key to delete the entry from the list.
Delete
Transfer a Call to Another Person
1. From a call that is not on hold, press
2. Enter the other person's phone number.
3. Press
or the Transfer soft key again.
Add Another Person to a Call
1. From a connected call that is not on hold, press the
Conf
soft key.
2. Enter the number of the second party, and then press
the Send soft key.
3. Press the Conf soft key again when the second party
answers. All parties are now joined in the conference.
Quick Start Guide
Quick Start Guide
Quick Start Guide
Quick Start Guide
.
or the Resume soft key.
o the Tran soft key.