Setting Up Tv Stations; Memorizing The Channels With Auto - LG LSC27990TT User Manual

Setting up TV stations

Memorizing the Channels with Auto

- For Auto program to work, the programming source
must be connected to the TV and the TV must be
receiving programming signals either over-the-air or
from a cable-type service provider.
Press the MENU button and then use
the STATION menu.
G
Press the button and then use
.
G
Press the button and then use
, .
Press the OK button to begin the channel search.
• Wait for auto program to complete the channel search
cycle before choosing a channel. The TV scans for
over-the-air channels and then channels provided by a
cable service.
[ Note ]
• When the channel search is complete, use the
buttons to review the memorized channels.
• If you press the MENU button in Auto program, the
function will stop and only channels programming up to
that time will remain.
• Auto program function can memorize only the channels
which are being received at that time.
• HDTV reception will only display if the digital signal
transmitted through the cable or satellite service
provider is high definition.
Or if the on air broadcast in your area is transmitted in
high definition and you have a high definition antenna
to receive the signal.
The higher the signal strength, the less likely you are to
experience picture degradation.
D / E
button to select
D / E
button to select
D / E
button to select
D D / E
STATION
Auto program
Manual
Edit
Name
OK
STATION
G
Auto program Antenna
Manual Cable
Edit
Name
OK MENU
Auto Program
DTV Channel 21
Analog Channels Found
Digital Channels Found
Progress(%) 40
MENU : DTV Skip
Wait for max. 10 minutes...
MENU
OK To Start
12
5
15