External Equipment Connections - LG LSC27990TT User Manual

Antenna Connection
Connecting
a VCR / DVD
Cable TV
Connections
12

External Equipment Connections

Antenna or Cable Service without a Cable Box Connections
For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
VHF antenna
UHF antenna
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
In a poor signal area to improve picture quality, purchase
and install a signal amplifier.
If the antenna is not installed properly, contact your dealer
for assistance.
Turn the end of the cable to the clockwise direction to be
connected to the connector located at the top of the
refrigerator.
Incorrect connection may cause a bad quality.
Connection
1. Connect the audio/video out sockets of the
VCR to audio/video in sockets of the set.
2. Press the INPUT button to select Component.
3. Press the PLAY button on the VCR.
The VCR playback picture
appears on the screen.
NOTE
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO
•
L/MONO socket of the set.
- After subscribing to a local cable TV service and installing a converter, you can
watch cable TV programming.
- For further cable TV information, contact a local cable service provider.
Connection
1. Use the INPUT button on the
remote control to select TV.
2. Tune to cable service provided
channels using the cable box.
Main Power
Bronze Wire
RF coaxial wire (75 ohm)
Turn clockwise to tighten.
Installation
Antenna jack
Bronze Wire
Be careful not to bend the bronze wire
when connecting the antenna.
Typical
Antennas
Connection Panel
Direct
Connection
Cable Box Connection Panel
VCR