Table of Contents
Advertisement
Editing Tracks
Dividing a Track into Two
Tracks (DIVIDE)
Example: Dividing a tune into tune A and tune B
■While the track you want to divide (track1 in
the example shown above) is being played
back
1
Press
"DIVIDE?".
2
Press
.
• You can also select the track number with
or
or the number buttons.
Refer to "Using the number buttons"
(
page 16).
3
Press
to specify the dividing
point.
• This product repeatedly plays back the 4
seconds of sound immediately following the
dividing point.
"POSIT." stands for "POSITION".
• When the dividing point does not have to be
adjusted, proceed to step 5.
• When you want to adjust the dividing point,
proceed to step 4.
Editing MDs
Track
number
repeatedly to select
For the locations of remote control
buttons, refer to page 58.
4
Press
or
• You can adjust the dividing point within the
range of -128 to +128 position (approxi-
mately -8 to +8 seconds in SP mode).
5
Press
.
6
Press
.
NOTE
• During editing, you can return to the previous step
by pressing
. You can quit the editing opera-
tion by pressing
• You cannot divide a track in an MD containing
254 or more tracks. When you press
3, "DISC FULL" appears.
• When you divide a track that has a title, the title is
added to both divided tracks.
.
.
in step
60
Advertisement
Table of Contents
