(Continued)
Listening to Radio Broadcasts
Storing Radio Stations (Preset)
You can store up to 30 FM radio stations and up to
15 AM radio stations.
■While the broadcast from the radio station
you want to preset is being received
1
Set the remote control mode
selector to AUDIO.
2
Press
.
• The preset number flashes for approxi-
mately 5 seconds.
3
While the preset number is flash-
ing, press the number buttons
(
-
or
set number you want to use.
• Refer to "Using the number buttons"
(
page 16).
• You can also select the preset number by
pressing
or
4
While the selected number is
flashing, press
• "STORED" appears and the selected radio
station is stored.
NOTE
• The type of FM reception (stereo/monaural) is also
(
page 20).
stored
• When you store a radio station to a preset num-
ber to which another radio station has previously
been stored, the newly set radio station replaces
the previously stored radio station.
Tuning In to a Preset Radio Station
■While an FM or AM broadcast is being received
1
Set the remote control mode
selector to AUDIO.
2
Use the number buttons to select
the preset number of the radio sta-
tion to which you want to tune in.
• Refer to "Using the number buttons"
(
page 16).
• You can also select the preset number by
pressing
or
21
) to select the pre-
.
or
.
.
For the locations of remote control
buttons, refer to page 20.
Entering radio station names
You can enter the name of a stored radio station
using up to 8 characters.
1
Set the remote control mode
selector to AUDIO.
2
Press
3
Entering a radio station name with
or the number buttons (
or
).
• To enter radio station names, refer to "Enter-
ing Titles" (
page 59).
4
Press
.
• "STORED" appears in the display window
and the entered radio station name is
registered.
NOTE
• When you store a radio station after you have
entered a radio station name, the entered radio
station name with the same preset number is
erased.
• You cannot enter radio station names after
selecting a radio broadcast with
Changing the Display in the
Display Window
Press
.
• Each time you press
changes as follows.
Display while a radio
broadcast is being
received
(
step 1 on page 20)
(Time display)
Clock display
Introduction
.
or
.
, the display
(With an MD loaded)
Display of remaining
time for MD recording
-