Program Playback Of An Md - JVC UX-QD70SUB Instructions Manual

Program Playback of an MD

This function allows you to program up to 32
tracks.
■While the MD is stopped
1
Set the remote control mode
selector to AUDIO.
2
Press to select
"PROGRAM".
Example: Display while MD program playback
is selected
Program indicator
3
Press the number buttons (
or ) to select the track num-
bers.
• Refer to "Using the number buttons"
( page 16).
Track number Program number
Total time for program playback
NOTE
• When you want to erase the program, press
while playback is stopped. Programmed tracks are
erased one by one from the last track. Holding
down erases all programmed tracks.
• When you try to program the 33rd track, "MEM-
ORY FULL" appears in the display window to
indicate that 33 or more tracks cannot be pro-
grammed.
• When total time for program playback reaches 2
hours 31 minutes, "--:--" appears.
4
Press .
NOTE
• You can set tracks for program playback either from
a CD, MD or DVD.
Listening to MDs
Confirming the programmed track
order
While playback is stopped, press
or
• You can add a track as the last track in the
program, or erase the last track.
( step 3 shown on the left)
Canceling the program playback
While playback is stopped, press
repeatedly to display an item
other than "PROGRAM".
• This operation does not erase the program.
Erasing all the programmed tracks
While playback is stopped, hold down
.
NOTE
-
• Ejecting the MD or turning off the main unit also
erases all the programmed tracks. This operation
also cancels program playback.
For the locations of remote control
buttons, refer to page 46.
repeatedly.
48