Related Manuals for Jetson JSCM3W-BLU
Summary of Contents for Jetson JSCM3W-BLU
- Page 1 2-in-1 Kick Scooter. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODEL SKU: JSCM3W-BLU...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 4: Table Of Contents
Contents Safety Warnings ........................6 Warranty Coverage . - Page 5 4. Making Moves 4.1 Riding While Seated ..................... . . 2 0 4.2 Riding While Standing .
-
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and •... -
Page 7: Warranty Coverage
• Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use. MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury. -
Page 8: About Your Product
1. About Your Product Product Overview 1. HANDLEBAR 2. STEM CLAMP 3. STEM 4. STEM HEIGHT ADJUSTMENT PIN 5. STEM RELEASE PIN (X2; LEFT AND RIGHT) 6. FRONT WHEEL (X2; MOTION-ACTIVATED LED LIGHT-UP) 7. DECK 8. REAR FOOT BRAKE 9. REAR WHEEL 10. - Page 9 NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 10: Specs & Features
Specs & Features ∙ WHEEL SIZES: 4.7” (FRONT), 3.5” (REAR) ∙ PRODUCT DIMENSIONS: 20.9” (L) × 10.3” (W) × 26.4” (H) ∙ DECK SIZE: 20.9” (L) × 5.1” (W) ∙ HANDLEBAR HEIGHT: 26.4” - 31.1” ∙ WEIGHT LIMIT: 66 LBS ∙... -
Page 11: Online Resources
Online Resources Scan for our most updated 2-in-1 Kick Scooter onboarding materials and support resources. -
Page 13: Getting Started
2. Getting Started Starting Notes ∙ KICK OFF YOUR ADVENTURE RIGHT: PRIOR TO USE OF THIS PRODUCT, CAREFULLY READ THE ENTIRE USER MANUAL, INCLUDING SAFETY WARNINGS. MAKE SURE YOU UNDERSTAND, ACCEPT, AND ADHERE TO ALL: − MANUFACTURER’S RECOMMENDATIONS. − SAFETY INSTRUCTIONS AND WARNINGS. −... -
Page 14: Assembly
Assembly 1. PLACE THE STEM OVER THE STEM MOUNT SUCH THAT THE SEAT IS ON THE SIDE FACING THE BACK OF THE SCOOTER. 2. PUSH IN THE STEM RELEASE PINS AND SLIDE THE STEM DOWN INTO THE STEM MOUNT UNTIL THE PINS POP INTO THE HOLES IN THE STEM MOUNT. -
Page 15: Adjusting Handlebar Height
Adjusting Handlebar Height STEM CLAMP LATCH RAISE THE HANDLEBAR AS YOUR LITTLE RIDER GROWS! LOWER IT TO MAKE IT MORE COMPACT FOR TRANSPORT AND STORAGE. 1. PULL OPEN THE STEM CLAMP LATCH. - Page 16 2. PRESS IN THE STEM HEIGHT ADJUSTMENT PIN AND RAISE OR STEM CLAMP LATCH LOWER THE HANDLEBAR UNTIL THE PIN CLICKS INTO ANOTHER STEM PIN HOLE. 3. CLOSE THE STEM CLAMP LATCH AND TO SECURE THE HANDLEBAR IN PLACE. IMPORTANT: THE STEM PIN ALONE WILL NOT KEEP THE STEM PIN HOLE SECURE.
-
Page 17: Features And Functions
3. Features & Functions Activating the LED Lights THE FRONT WHEEL LIGHTS ARE MOTION-ACTIVATED AND WILL ILLUMINATE WHENEVER THE WHEELS ARE IN MOTION. (NO BATTERIES REQUIRED!) Folding & Unfolding the Seat TO FOLD THE SEAT UP: LIFT THE BACK OF THE SEAT UP TOWARD THE HANDLEBAR UNTIL IT "CLICKS" INTO THE FOLDED POSITION. TO UNFOLD THE SEAT: PULL THE BACK OF THE SEAT DOWN TOWARD THE REAR WHEEL UNTIL IT "CLICKS"... -
Page 18: Removing The Stem & Seat For Storage & Transport
STEM STEM RELEASE PIN (X2; LEFT AND RIGHT) STEM MOUNT STEM RELEASE PIN HOLE Removing the Stem & Seat for Storage & Transport TO REMOVE STEM: PRESS THE LEFT AND RIGHT STEM RELEASE PINS IN AND PULL THE STEM UP AND OUT OF THE STEM MOUNT. TO RE-INSERT THE STEM: PLACE THE STEM OVER THE STEM MOUNT SUCH THAT THE STEM CLAMP LATCH IS FACING THE BACK OF THE SCOOTER. -
Page 20: Making Moves
4. Making Moves Riding While Seated RIDING: PUSH FEET OFF THE GROUND TO PROPEL FORWARD. STOPPING: PLANT FEET ON THE GROUND TO STOP MOVEMENT. Riding While Standing FOLD THE SEAT AWAY (SECTION 3.2) TO RIDE WHILE STANDING ON THE DECK. RIDING: 1. - Page 21 USING THE BRAKE: PRESS DOWN GENTLY WITH YOUR REAR RIDING FOOT TO SLOW DOWN. APPLY MORE PRESSURE TO COME TO A COMPLETE STOP. REAR FOOT BRAKE IMPORTANT: NEVER USE THE REAR FOOT BRAKE TO STOP WHEN RIDING WHILE SEATED. WHEN SEATED, PLANT YOUR FEET ON THE GROUND TO SLOW DOWN OR COME TO A STOP.
-
Page 22: Making Turns
Making Turns THIS SCOOTER IS A LEAN-TO-STEER SCOOTER. ITS TRIANGULAR BASE PROVIDES A STABLE FOUNDATION, WHICH HELPS NEW RIDERS KEEP THEIR BALANCE WHILE THEY LEARN HOW TO MOVE. TO TURN, LEAN SLIGHTLY TO THE LEFT OR RIGHT AND THE SCOOTER WILL VEER ACCORDINGLY. -
Page 23: Helmet Safety
Helmet Safety A HELMET SHOULD BE WORN BY THE RIDER AT ALL TIMES. PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 24: Care & Maintenance
RIDE THE SCOOTER ON A SMOOTH, FLAT SURFACE. ∙ PROTECT FROM WATER OR MOISTURE. ∙ CONTACT THE JETSON CARE TEAM IF THERE ARE ANY ISSUES WITH YOUR SCOOTER. STORING YOUR SCOOTER ∙ ∙ STORE YOUR SCOOTER INDOORS AND IN A DRY PLACE. -
Page 25: Stay Connected
Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you! - Page 26 © 2024, TruRide Tech. ALL RIGHTS RESERVED. Manufactured for TruRide Tech LLC. JETSON® is a registered trademark used under license from JetStream Brands LLC. No portion of this package, including shape, graphics, and design, may be reproduced or transmitted in any form or by any means.
Need help?
Do you have a question about the JSCM3W-BLU and is the answer not in the manual?
Questions and answers