Wifi Guide - Argo CLIMADESIGN MULTI Series User Manual And Installation Manual

INTRODUCTION
The air conditioner is equipped with remote control technology, with a Wi-Fi module inside the appliance connected
to the display and the air conditioner control. The air conditioner must be in constant connection with a wireless router
or access point connected to the internet. Mobile devices such as smartphones and tablets, on which dedicated
applications are installed and Wi-Fi modules subsequently configured, can be used as remote controls once connected
to the internet.
DOWNLOAD AND INSTALL THE CONTROL SOFTWARE
The control software can be downloaded and installed as follows.
1. For mobile devices such as smartphones and tablets, search and download
"SmartLife" from Google Play or App store and install it.
2. You can also scan the "QR code" below, which will automatically direct you
to the download interface for installing the software.
3. Follow the instructions on the App step by step.
RESET OF THE WI-FI MODULE
With the unit turned on, press the COOL and + buttons simultaneously for 3 seconds, 8 sound signals will be heard,
then an interval of 2 seconds and a double sound signal will be heard to confirm that the reset has occurred correctly.
If the reset does not occur correctly, repeat the operation.
CONNECTING THE INDOOR UNIT TO THE SMART LIFE APP
Once logged in, you can add the unit by scanning the QR code below from the Smart Life app:
V 06/24

WIFI GUIDE

43