Wifi Guide (Optional) - Argo CHARM DUBBEL 9000 UI User Manual And Installation Manual

• Press the "ON/OFF" button again, the air-conditioner stops.
DRY mode
• Press the "MODE" button, select the drying operation mode.
• By pressing the "
• By pressing the "SPEED" button, you can select the fan speed from LOW, MIO, HIGH, AUTO.
• Press the "ON/OFF" button, the air-conditioner starts to operate.
• Press the "ON/OFF" button again, the air-conditioner stops.
The remote controller has a backlight which can be turned on by pressing any button for the convenience of
operation in darkness. The backlight will be automatically turned off if there is no operation within 10 seconds.
INTRODUCTION
It is possibile to install the WiFi moudle to remotery control the our conditioner. The AC system is equipped with remote
control technology, with the WI-FI module inside the machine connected to the display panel and the command to
run the AC transmitted. The AC system is in constant connection with a wireless router or access point attached to the
Internet. Mobile terminals such as smart phones and tablet computers, on which special control software are installed
and WI-FI modules successfully configured locally, can be used as remote controllers once they are connected to the
Internet.
DOWNLOAD AND INSTALL THE CONTROL SOFTWARE
The control software can be downloaded and installed as follows.
1. For mobile terminals such as smart phones and tablet (Android 4.1 and iOS 6.0 or above only), search and
download "AC Freedom" from Google Play or App store on and install it on your system.
2. You may also use your mobile terminal (Android 4.1 and iOS 6.0 or above only) to scan the "QR code" (see
Fig.1) with a thirdparty scan tool, which will automatically direct you to the download interface of AC Freedom
for you to download and install the software.
For Android
42
" or " " you can set the temperature, the display changes as you touch the button.

WIFI GUIDE (optional)

For IOS
V 11/22