Performance Tool W85005 Owner's Manual page 2

SAFETY GUIDELINES / DEFINITIONS
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting
steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest
product information available at the time of publication. The manufacturer reserves the right to make product changes at any time
without notice.
 WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or maintain
this product. Failure to comply with the instructions may result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when using this product:
 DANGER: Indicates an imminently hazardous situation
that, if not avoided, WILL result in death or serious injury.
 WARNING: Indicates a potentially hazardous situation that,
if not avoided, COULD result in death or serious injury.
UNPACKING AND INSPECTION
After opening the carton, unpack your new product and related parts and accessories. Please
inspect it carefully for any damage that may have occurred during transit. Please check it against
the photograph on carton. If any parts are missing, please call customer service at 1-800-497-0552
between 6 a.m. and 5 p.m. Pacific time.
WARNING: DO NOT operate this product if damaged during shipment, handling or misuse.

Do not operate the product until the parts have been replaced or the fault rectified. Failure to do
so may result in serious personal injury or property damage. All damaged parts must be repaired
or replaced as needed prior to operating this product. Check to see that all nuts, bolts and fittings
are secure before putting this product into service.
If you have any questions, or require assistance with damaged or missing parts, please contact
our customer service department at 1-800-497-0552. Please have the serial number, model
number, and date of purchase available for reference when calling.
SPECIFICATIONS:
Weight Capacity: ............................................................350 lbs. (158 Kg)
Length:.............................................................................................. 40 in.
Width: ............................................................................................... 17 in.
Clearance: .......................................................................................... 4 in.
Swivel Casters: ...................................................... (6) 2-1/2 in. (63.5 mm)
Specifications are subject to change without notice.
REPLACEMENT PARTS AVAILABLE:
Replacement Caster Assembly ................................................... W85003

WARNING. READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS
BEFORE OPERATING THIS PRODUCT. FAILURE TO DO SO MAY RESULT IN FIRE, ELECTRICAL
SHOCK, PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
GENERAL SAFETY
• Keep the area clean and well lit. Cluttered or dark areas can cause accidents.
• Be aware of what you are doing and use common sense while using the tool. Do not use a
tool when you are tired or under the influence of drugs, alcohol or medication. A moment of
distraction while using a tool can cause serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust masks,
non-slip safety shoes, helmets or ear protection used in appropriate conditions will reduce
the risk of injury.
• Do not rush. Maintain proper footing and balance at all times. This allows better control of the
tool in unexpected situations.
 CAUTION: Indicates a potentially hazardous situation that,
if not avoided, MAY result in minor or moderate injury.
 NOTE: Indicates important information, which if not
followed, MAY cause damage to equipment.