Performance Tool W1611 Owner's Manual

Performance Tool W1611 Owner's Manual

2 1/4 ton hydraulic floor jack
Hide thumbs Also See for W1611:

Advertisement

2 1/4 TON HYDRAULIC
FLOOR JACK
Item Number W1611
WARNING
It is the owner and/or operators' responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product. The
owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and
while in use, maintaining the unit in good working order. If the owner and/or operator are not fluent in
English, the product warnings and instructions shall be read and discussed with the operators' native
language by the purchaser/owner or his designee. Make sure that the operator comprehends its contents.
Safety information shall be emphasized and understood prior to usage. The product shall be inspected per
the operating instructions.
Users of this product must fully understand these instructions. Each person operating this product must also
be of sound mind and body and must not be under the influence of any substance that might impair their
vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W1611 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Performance Tool W1611

  • Page 1 2 1/4 TON HYDRAULIC FLOOR JACK Item Number W1611 OWNER’S MANUAL WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product. The owner/operator shall retain product instructions for future reference.
  • Page 2: Safety Guidelines - Definitions

    SAFETY GUIDELINES / DEFINITIONS This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the time of publication.
  • Page 3: Before Use

    30. The warnings, precautions, and instructions discussed carry important information. If unreadable or missing, in this manual cannot cover all possible conditions and contact Performance Tool for a replacement. situations that may occur. The operator must understand 21. Before use, read manufacturer’s instruction manual for the that common sense and caution are factors, which cannot vehicle (or object) you will lift.
  • Page 4: Care And Maintenance

    OPERATION To lower: 9. ALWAYS support load with jack stands. (See figure 2) Place jack stands of appropriate 1. Remove all tools, parts, etc. from under the capacity (not included) beneath the vehicle vehicle. at locations recommended by the vehicle 2.
  • Page 5: Troubleshooting

    TROUBLESHOOTING Your Performance Tool® product was constructed with quality materials and work- manship and will give you many years of trouble free use when cared for as described in the "Care & Maintenance" section on page 4. However, as with any mechanical device, periodic adjustments are necessary to maintain a peak level of performance.
  • Page 6: Replacement Parts List

    REPLACEMENT PARTS LIST Figure 5 Ram Assembly (See figure 6) Description Qty. Description Qty. Description Qty. 65 Lifting Arm Spindle 1 39 Return Spring 51 Front Wheel Spacer 2 40 Spring Washer 52 Front Wheel 66 Saddle Mount Pin 41 Nut 53 Flat Washer 67 Saddle Assembly 42 Caster Wheel 68 Radius Link Pin 54 Front Wheel Spindle 1 69 Retaining Pin 43 Caster Wheel Spindle 2...
  • Page 7 REPLACEMENT PARTS LIST - RAM ASSEMBLY Figure  31 16 # Description Qty. # Description Qty. # Description Qty. Hydraulic Unit Body 1 12 Oil Fill Plug 26 Piston Pin 1 3/16” Steel Ball 13 Fiber Washer (A) 27 Connecting Pin Filter Body Screen 14 Top Nut 28 Retaining Pin Copper Washer 15 Top Nut O-Ring 31 Release Valve Spacer 1 Pump Cylinder O-Ring 1 16 1/4” Steel Ball 32 Release Valve O-Ring 1 Back Up Ring...
  • Page 8 PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its products.

Table of Contents