Permanent Installation - Haier HDC2406TW User Manual

G. With all the fittings connected, open the tap to test to make sure there
are no leaks. Connect the A/C power cord and use the dishwasher as
outlined in the manual.
H. When finished using the dishwasher, you need to close the water
supply to the tap and disconnect the power supply cord..
WARNING: The water intake hose is now pressurized.
Press the red pressure release button on the Quick Release Faucet
Adapter, which will depressurize the water intake hose to easily remove
without squirting water which can be very hot and cause scalding.
The Quick Release Faucet Adapter should then be disconnected from the
faucet and stored for next use.
CAUTION: Do not let children disconnect the dishwasher. Close
supervision of children is always important around
appliances.

PERmANENT INSTALLATION

The permanent installation will require connecting the dishwasher to a
permanent "HOT" water intake, usually tapped off from the sink's hot
water line. Also, the dishwasher's grey drain hose (included) needs to
be connected to a special sink drain pipe (not included) under the sink /
counter.
We recommend that you Contact a qualified person to carry out
the permanent installation. The dishwasher must be installed to meet
all local codes and ordinances for electrical and plumbing connections.
Parts Needed for Permanent Installation
Intake Hose: You will need to purchase a standard 3/4" intake
dishwasher hose and fittings to make a permanent installation.
Direct connect dishwasher tail pipe:
You will need to purchase a dishwasher tail pipe designed to connect to
a kitchen sink drain, and a matching hose clamp.
English
9