Error Codes - Haier HDC2406TW User Manual

English
Problem
The dishes are
not clean.
Cloudiness on
the glassware.
Black or gray
marks on dishes.
Detergent left
in the dispenser
cups.
The dishes are
not dry

ERROR CODES

Your dishwasher has an error code indicator function. For certain appliance malfunctions, the corresponding error code will
be shown in the LED display:
Code
E1
E4
22
Possible Causes
The dishes were not loaded correctly
The program selected was not the
appropriate cycle for the condition of
the dishes.
Not enough detergent was dispensed.
Items were blocking the rotation path
of the water spray arm.
The filter assembly in the base of the
unit is not clean, is clogged, or is not
installed correctly.
(This may cause the spray arm jets to
become clogged).
This is a combination of soft water and
too much detergent.
Aluminum utensils have rubbed against
the dishes.
Dishes blocked the detergent cups
not allowing them to open completely
during the wash cycle.
Improper loading
Too little rinse aid
Dishes were removed from the washer
too soon.
Wrong program / cycle selected.
Using cutlery with a low quality
coating.
Meaning
Water Intake Problem
Overflow
Possible Solution:
See "Loading the Dishwasher Rack" section
of this manual.
Select a more intense program.
Use more detergent, or change the type of
detergent being used.
Rearrange the items accordingly so that the
spray arm can rotate freely.
Clean and/or fit the filter assembly
correctly.
Clean the spray arm jets. See the
"Cleaning the Spray Arm "section of this
manual.
Use less detergent if you have soft water
and select a shorter cycle to wash the
glassware to get them clean.
Use a mild abrasive cleaner to remove the
marks
Rearrange the dishes accordingly and re-
run the wash cycle.
See "Loading the Dishwasher Rack" section
of this manual.
Increase the amount of rinse aid dispensed
or refill the rinse aid dispenser if empty.
Do not empty your dishwasher immediately
after the cycle ends. Open the door slightly
so that the steam can escape. Begin
unloading the dishwasher once the dishes
are barely warm to the touch.
Shorter cycles/programs use lower
temperatures which also lowers cleaning
performance. Choose a cycle / program
with a longer wash time.
Water drainage is more difficult with these
items. Cutlery or dishes of this type are not
suitable for dishwasher use.
Possible cause
Faucet is not opened, water intake is restricted, or
water pressure is too low.
Some element of dishwasher is leaking. Turn main
water supply off immediately! Remove water from
around base before restarting dishwasher.