Set Up A Room; Add A Device To A Room - HP iPAQ h5400 Series Reference Manual

Set Up a Room

You can program the universal remote to control devices in
each room.
To set up a room:
1. From the Start menu, tap Nevo.
2. Tap the Room icon, then Add Room.
3. Tap Next.
4. Assign an icon to the room, then tap Next.
5. Enter a room label and select a region from Regions down
arrow list.
6. Tap Next.

Add a Device to a Room

You must set up a room before you can assign a device to it.
For more information on setting up a room, see section "To set up
a room."
1. From the Start menu, tap Nevo.
2. Tap the Room icon.
3. Select a room.
4. Tap the Add Devices icon to start the Device wizard.
5. Add the device to your room.
Reference Guide
Using the Universal Remote
10–15