Change Power Management Settings; Dim Or Adjust The Brightness Of The Backlight; Change The Device Name; Set Alarms - HP iPAQ Travel Companion Product Manual

To change the volume:
1.
Tap the
2.
Tap the
3.
Tap the

Change power management settings

PLACEHOLDER: NEED MORE INFORMATION

Dim or adjust the brightness of the backlight

PLACEHOLDER: NEED MORE INFORMATION

Change the device name

PLACEHOLDER: NEED MORE INFORMATION

Set alarms

To set alarm on the Travel Companion:
1. Tap Extras > Clock.
2.
Tap the
3. Tap Description and enter a name for the alarm.
4. Tap Time and set the time for the alarm.
5. Tap Once, Regular, Countdown, or Call back to set the alarm.
NOTE: To delete an alarm, select the alarm and tap the
to open an alarm, and then tap the

Obtain services for a cracked or damaged screen

NOTE: HP is not responsible for damage that occurs as a result of failure to follow the instructions
that came with the HP branded product. Refer to the warranty document included with the Travel
Companion for more information.
If you have a nonwarranty event occur such as a damaged or cracked screen and want your device
repaired, contact HP Customer Support at
HP customer service on a nonwarranty event results in a charge for the repair.
(Increase volume) icon to increase the volume.
(Decrease volume) icon to decrease the volume.
(mute) icon to turn off all sounds and notifications.
(alarm) icon, and then tap the
(edit alarm) icon.
(new alarm) icon.
(delete alarm) icon. To edit an alarm, tap
http://www.hp.com/support
Change power management settings
for service. However, contacting
7