HP iPAQ h5400 Addendum

LightWeight Extensible
Authentication Protocol Support
Instructions
CAUTION: Please read this addendum before using Lightweight
Extensible Authentication Protocol (LEAP) firmware support.
The Cisco Lightweight Extensible Authentication Protocol (LEAP) is
supported in the system firmware for the iPAQ Pocket PC Series for
customers whose network supports this feature. LEAP is wireless
technology that is built on the 802.1x authentications for local area
networks (LANs), which allows users to roam freely and not to be tied to
any one specific domain or to rotation of encrypted security keys.
Customers can use their username and password as defined by the
administrator.
To use the Cisco Lightweight Extensible Authentication Protocol
(LEAP), follow these instructions:
The iPAQ WLAN Security drop down menu contains the Profile
Wizard necessary to access and select Authentication settings.
1. To access the iPAQ WLAN Security Menu, tap Start > iPAQ
Wireless > iPAQ WLAN feature. The WLAN Security Menu is the
third screen in the Profile Wizard.
2. Once you access the WLAN Security Menu, under the
Authentication drop-down menu, select LEAP.
Addendum