Create Profiles With Security - HP iPAQ h5400 Series Reference Manual

7. If you selected "Use specific IP address," you must enter
information in all remaining fields.
✎
Please contact your network administrator or your service
provider for this information.
8. Tap Finish.

Create Profiles with Security

You can use encryption to increase security to prevent data theft.
This device supports open system (no encryption), 64-bit shared
key, and 128-bit shared key encryption.
The wireless access point that you are connecting to must use the
same encryption to receive and transmit data.
To create profiles with security:
1. Follow steps 1 through 6 in the section "Create Profiles
without Security."
2. Tap Next.
3. Select "64" or "128" bit from the Wireless Encryption down
arrow list.
4. Select "hexadecimal" or "alphanumeric" from the WEP
Keys down arrow list.
Reference Guide
Using the Wireless LAN
3–7