Bezel Blanks
On some models, there is a bezel blank covering the external drive bay that needs to be removed before
installing a drive. To remove a bezel blank:
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Remove the front bezel
4.
Push the two retaining tabs that hold the bezel blank in place towards the outer right edge of the
bezel (1), and then pull the bezel blank inward to remove it (2).
(Preparation for Disassembly on page
(Computer Access Panel on page
(Front Bezel on page
164).
159).
163).
Bezel Blanks 165