Front Bezel - HP Compaq dc7800 Reference Manual
Business pc
Hide thumbs
Also See for Compaq dc7800:
- Technical reference manual (102 pages) ,
- Troubleshooting manual (70 pages) ,
- Quickspecs (67 pages)
Table of Contents
Advertisement
Front Bezel
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Lift the fan up and place it on top of the optical drive to access the front bezel release tabs. You
do not need to disconnect the fan cable from the system board.
4.
Press the two release tabs on the inside of the bezel towards the right side of the computer (1),
and then rotate the bezel off from right to left (2).
To replace the bezel, reverse the removal procedures.
164 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
(Preparation for Disassembly on page
(Computer Access Panel on page
159).
163).
Advertisement
Table of Contents
