Rear Chassis Fan - HP Compaq dc7800 Reference Manual
Business pc
Hide thumbs
Also See for Compaq dc7800:
- Technical reference manual (102 pages) ,
- Troubleshooting manual (70 pages) ,
- Quickspecs (67 pages)
Table of Contents
Advertisement
Rear Chassis Fan
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Disconnect the fan control cable from the system board.
4.
Press down on the two upper tabs (1) to loosen the fan housing from the chassis.
5.
Rotate the fan forward (2), and then lift it up and out of the chassis (3).
To install the fan assembly, reverse the removal procedure. Be sure to orient the air flow out of the unit.
(Preparation for Disassembly on page
(Computer Access Panel on page
60).
64).
Rear Chassis Fan
95
Advertisement
Table of Contents
