Defining Multicast Forward All Settings - HP Blade bc1500 User Manual

Defining Multicast Forward All Settings

The Multicast Forward All page contains fields for attaching ports or LAGs to a device that is
attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast
packets are forwarded to the appropriate port or VLAN. Unless LAGs are defined, only a
Multicast Forward All table displays.
To define Multicast Forward All settings:
1. Click Layer 2 > Multicast > Multicast Forward All. The Multicast Forward All opens:
Multicast Forward All
The Multicast Forward All contains the following fields:
❏
VLAN ID — Displays the VLAN for which Multicast parameters are displayed.
❏
Ports — Displays ports that can be added to a Multicast service.
❏
LAGs — Displays LAGs that can be added to a Multicast service.
❏
Interface — Displays the interface for which Multicast settings are displayed.
❏
Interface Status — Displays the status of the interface. Possible values are:
◆
Static — Indicates the port is attached to the Multicast router or switch as a static
port.
◆
Forbidden — Indicates the port is forbidden.
◆
Excluded — Indicates the port is excluded from the Multicast router or switch.
◆
Dynamic — Indicates the port is attached to the Multicast router or switch as a
dynamic port.
Embedded Web System User Guide www.hp.com
Configuring Multicast Forwarding
10-5