Defining Gvrp - HP Blade bc1500 User Manual

Configuring Interfaces

Defining GVRP

GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of
VLAN membership information among VLAN-aware bridges. GVRP allows VLAN-aware
bridges to automatically learn VLANs to bridge ports mapping, without having to individually
configure each bridge and register VLAN membership.
To define GVRP on the device:
1. Click Layer 2 > VLAN > GVRP Parameters. The GVRP Parameters page opens:
GVRP Parameters
The GVRP Parameters page contains the following fields:
❏
GVRP Global Status — Indicates if GVRP is enabled on the device. The possible field
values are:
◆
Enable — Enables GVRP on the selected device.
◆
Disable — Disables GVRP on the selected device.
❏
Port — Displays the GVRP parameters for ports.
❏
LAG — Displays the GVRP parameters for LAGs.
❏
Interface — Displays the port on which GVRP is enabled. The possible field values are:
◆
Port — Indicates the port number on which GVRP is enabled.
◆
LAG — Indicates the LAG number on which GVRP is enabled.
❏
GVRP State — Indicates if GVRP is enabled on the port. The possible field values are:
◆
Enabled — Enables GVRP on the selected port.
◆
Disabled — Disables GVRP on the selected port.
6-18 www.hp.com Embedded Web System User Guide