Defining Sntp Servers - HP Blade bc1500 User Manual

◆
In progress — Indicates the SNTP server is currently sending or receiving SNTP
information.
◆
Unknown — Indicates the progress of the SNTP information currently being sent is
unknown. For example, the device is currently looking for an interface.
❏
Last Response — Displays the last time a response was received from the SNTP server.
❏
Offset — Indicates the time difference between the device local clock and the acquired
time from the SNTP server.
❏
Delay — Indicates the amount of time it takes for a device request to reach the SNTP
server.
2. Define the fields.
3. Click

Defining SNTP Servers

To add an SNTP server:
1. Click
Add SNTP Server
In addition to the fields in the SNTP Settings page, the Add SNTP Server page contains the
following additional field:
❏
Enable Poll Interval — Indicates if the device polls the SNTP server. The possible field
values are:
◆
Checked — Enables polling the SNTP server for SNTP information.
◆
Unchecked — Disables polling the server for SNTP information. This is the default
value.
2. Define the SNTP Server, Enable Poll Interval, and Encryption Key ID fields.
3. Click
Embedded Web System User Guide
. The SNTP global settings are defined, and the device is updated.
. The Add SNTP Server page opens:
. The SNTP server is added, and the device is updated.
www.hp.com
Configuring System Time
3-7