Installation - Blumfeldt Swiftwave User Manual

INSTALLATION

• Before installation, check that all parts are complete and that the product
is undamaged.
• If you wish to use the electric heater as a freestanding unit, please attach
the feet supplied with the heater according to the instructions below.
Ensure that the heater is mounted on a level, stable and clean surface.
Freestanding installation
1. Place the product upside down
on a soft cotton cloth or carpet.
2. Attach the feet to the base of
the heater using the screws
provided. Align the holes in
the base with the holes in the
feet, insert the screws through
the holes and tighten with a
screwdriver.
Wall mounted installation
1. Take 2 brackets, 4 expansion screws and 4 screws out of the box and fix
2 brackets to the wall according to the distance between the holes of the
brackets as shown in the picture below.
2. Holding the side of the product, look at the position of the wall hole on
the back cover and slide the wall to the top of the slot, i.e. the installation
of the wall is complete, as shown in the picture below.
476
270
EN
23