Page 3
richtig funktioniert und bevor Sie es trocknen. • Benutzen Sie das Gerät nicht, wenn es umgefallen ist. • Zerlegen Sie das Gerät nicht. Ein falsch repariertes Gerät kann für den Benutzer ge- fährlich sein. Wenn Probleme auftreten, wenden Sie sich an den Kundendienst. •...
Montage Führen Sie die untere Stange (11) in Klemme den Standfuß (16) und ziehen Sie ihn mit einer Kreuzschlitzschraube fest. untere Stange Schrauben Standfuß Stecken Sie die mittlere Stange (9) in mittlere Stange die untere Stange (11) und befestigen Sie die Stange mit einer Kreuzschlitz- Schrauben schraube.
Je nach Bedarf kann der Winkel des Heizelement Heizelements auf einen Winkel von 0-45 Grad eingestellt werden. Gehäuse Bedienung Bedienen Sie den Schalter (5), um das Gerät einzuschalten. Die leichte Vibration, die sich nach dem Einschalten bemerkbar macht, hört nach einigen Sekunden auf. Leistungsstufen Position 0 Position 1...
Disposal Considerations ..... . 11 Declaration of Conformity ..... 11 Technical Data Item number 10028606 Rated voltage 230 V, 50 Hz Power consumption max.
Page 8
• Never dismantle your appliance. An incorrectly repaired appliance maybe dangerous to the user. If you encounter any problems, please turn to our customer service. • The warranty will be void in the event of damage arising from improper use. •...
Overview Heating element Knob Body Position indication plate Pull switch Tube cover Upper post assembly Phillips screws Middle post 10 Phillips screws 11 Lower post assembly 12 Clamp 13 Power cord 14 Base cover 15 Phillips screws 16 Base assembly...
Assembly Insert the lower post assembly (11) into clamp the base assembly (16) and then fix it lower post tightly by means of a Phillips screw, and assembly insert the clamp (12) into the lower post screws (11). base assembly Join the lower post assembly (11) and middle post the middle post (9) together with a Phil-...
You can adjust the angle of the heating heating element element according to your needs at an angle of 0-45° body Operation The appliance is switched on by means of the pull switch (5). The slight vibration notice- able when the appliance is switched on will stop after a few seconds. Operation Modes Position 0 Stop...
Need help?
Do you have a question about the 10028606 and is the answer not in the manual?
Questions and answers