Download
Share
Print this page
Renesas YROTATE-IT-RX220 Quick Start Manual
  1. Manuals
  2. Brands
  3. Renesas Manuals
  4. Computer Hardware
  5. YROTATE-IT-RX220
  6. Quick start manual
Renesas YROTATE-IT-RX220 Quick Start Manual

Renesas YROTATE-IT-RX220 Quick Start Manual

Hide thumbs Also See for YROTATE-IT-RX220:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Quick Start Guide: YROTATE-IT-RX220
Document Contents
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
1.0

Introduction

This quick start guide assists the user to connect and use the YROTATE-IT-RX220 motor control kit for the first
time. The RX220 microcontroller flash memory is pre-programmed with a motor control project. Please check
the contents of the kit using the supplied package contents list and notify your supplier if any are missing.
Note: PLEASE DO NOT CONNECT THE BOARD TO THE HOST PC BEFORE INSTRUCTED
2.0

Board Layout

For further board details, please refer to the YROTATE-IT-RX220 User Manual.
YROTATE-IT-RX220 Quick Start Guide
1
1
1
2
3
4
4
6
7
D012974-11 V0102

Advertisement

loading
Need help?

Need help?

Do you have a question about the YROTATE-IT-RX220 and is the answer not in the manual?

Questions and answers

Related Manuals for Renesas YROTATE-IT-RX220

Summary of Contents for Renesas YROTATE-IT-RX220

  • Page 1: Table Of Contents

    Support Introduction This quick start guide assists the user to connect and use the YROTATE-IT-RX220 motor control kit for the first time. The RX220 microcontroller flash memory is pre-programmed with a motor control project. Please check the contents of the kit using the supplied package contents list and notify your supplier if any are missing.

  • Page 2: Initial Board Configuration

    Quick Start Guide: YROTATE-IT-RX220 Initial Board Configuration Before connecting the USB cable to the host PC and to the YROTATE-IT-RX220 board please follow the setup procedure as described below. 1. The demonstration BLDC motor comes pre-wired with its connector as shown below.

  • Page 3: Pc Graphical User Interface (Gui) Software Installation

    Quick Start Guide: YROTATE-IT-RX220 PC Graphical User Interface (GUI) Software Installation Before starting the GUI Installation please ensure the host PC has Flash Player and Microsoft .NET framework loaded. Insert the Software CD into your computer’s CD-ROM drive. The CD should start the installation automatically.

  • Page 4: Installing Usb Drivers

    To install the virtual UART drivers 1. First connect the USB cable to the host PC and then connect to the YROTATE-IT-RX220 board. 2. The host PC will detect the new hardware and start the driver installation. Follow the Windows instructions, selecting <NOT THIS TIME>...
  • Page 5 Quick Start Guide: YROTATE-IT-RX220 Once the GUI is open use the following procedure to connect the GUI to the YROTATE-IT-RX220 board. • Select the “Select board setup” drop down menu bar in the “Communication Settings” box in the top left hand corner of the GUI panel.

  • Page 6: Next Steps

    Drivers and setup files for the PC Graphical User Interface YROTATE-IT-RX62T Drivers YROTATE-IT-RX220 Drivers Embedded Software E2Studio Source Code Source files for code flashed by default into the Renesas microcontroller HEW Project Source Code IEC60730 Self Test MCU software Manuals Motor Specifications...

  • Page 7: Support

    Renesas Europe on Facebook www.facebook.com/RenesasEurope Renesas Europe on Twitter www.twitter.com/Renesas_Europe ©2014 Renesas Electronics Europe GmbH. All rights reserved ©2014 Renesas Electronics Corporation. All rights reserved ©2014 Renesas Electronics Solution Corp Ltd. All rights reserved YROTATE-IT-RX220 Quick Start Guide D012974-11 V0102...