Advertisement
Quick Links
QuickStart Guide
YRPBRL78G14
1. Installation
The installation of the demonstration files and GUI will be automatically performed by the DVD installer. If the DVD does not autostart, please run the "Setup" executable
file on the DVD and follow the directions for the installation. Please note that the user will require administration rights to the host PC in order to install the demonstration
and tool software.
2. Connection
1.
First ensure that a jumper is fitted on CN4 and that the YRPBRL78G14 stick jumpers are configured as shown below.
2.
Next connect the YRPBRL78G14 USB stick to the host PC using the USB cable provided and when the USB stick is connected, diode D1 should be on, indicating
that power is supplied to the YRPBRL78G14 Stick.
3.
If this is the first time the USB stick is connected to the host PC, the drivers will be installed automatically. Accept any permission dialogs that arise. On completion
the driver should be "Renesas Starter Kit Virtual UART". This can be verified by in the Device Manager and note the "com" port assigned to the USB stick.
YRPBRL78G14 Quick Start Guide
D010744_11
Jumpers
Configuration
CN8
CN7
CN6
CN11
2-3
2-3
2-3
2-3
1
Advertisement
Related Manuals for Renesas YRBRL78G14
Summary of Contents for Renesas YRBRL78G14
- Page 1 If this is the first time the USB stick is connected to the host PC, the drivers will be installed automatically. Accept any permission dialogs that arise. On completion the driver should be “Renesas Starter Kit Virtual UART”. This can be verified by in the Device Manager and note the “com” port assigned to the USB stick.
- Page 2 3. Starting the demonstration To start the demonstrations ensure that the USB stick is connected and the virtual UART driver has been successfully installed. The Demonstrations are controlled by the YRPBRL78G14 GUI which can be started from the “Start => All Programs” menu or from the icon on the desktop. The GUI will automatically detect the com port for the YRPBRL78G14 stick and start the GUI.
- Page 3 The demonstration GUI provides a number of demonstrations of the key RL78/G14 functions. Real Time Clock tab The RL78/G14 USB stick internal RTC can be synchronized to the host PC clock (click on the “Sync” button). Also the RTC interval interrupt and Alarm clock wake up can be set by the GUI.
- Page 4 Start => All Programs menu => Renesas Electronics e2studio => Renesas E2 Studio YRPBRL78G14-Demo GUI This program provides the interface between to the YRPBRL78G14 from the user’s PC.