Datalogic Reader Matrix-1000 Reference Manual page 49

SOFTWARE CONFIGURATION
Parameters to verify/modify:
Operating Mode
Calibration
Communication
Image Processing
1D & 2D, Postal Codes
Data Collection
Digital I/O
Match Code
Miscellaneous
Symbol Verification
LEDs And Keypad
Sets the parameters which customize the reader operating
mode starting from three main modes:
One Shot: acquires a single image based on the selected
value for the Acquisition Trigger and Acquisition Trigger
Delay.
Continuous: continuously acquires images with a rate up to
30 frames per second depending on the decoding time.
Phase Mode: acquires images during the reading phase
depending on the selected value for the Acquisition Trigger
and Acquisition Trigger Delay. The Reading Phase-ON
and Reading Phase-OFF events mark respectively the
beginning and end of the reading phase.
Calibrates the acquisition parameters to maximize the
reading performance (see par. 4.4.2)
Configures the parameters relative to each serial port
regarding the transmission, message formatting and string
receiving.
Any change to
parameters (baud rate, data bits, etc.) is effective as soon
as the reader is disconnected from VisiSet™.
Sets the image processing parameters shared by all
available symbologies.
Sets the characteristics of the code symbologies to be
read.
Defines the code-collection parameters and the output
message format.
Configures the reader input/output parameters.
Allows setting a user-defined code and relative parameters
to which the read code will be compared (matched).
Sets the reader name and the saved image format.
Sets the parameters relative to the various specifications in
the Standards which regulate code validation.
Sets the LED and Keypad parameters related to their
selected Functions.
the VisiSet™ communication
4
port
41