Direct Time Search - GoVideo DVR5000 User Manual

Direct Time Search

Use Direct Time Search to
locate a specific tape location
in hours, minutes, and seconds.
This is useful for editing pur-
poses, i.e. you can advance the
tape directly to the beginning of
the desired scene.
94
DVD-VCR USER'S GUIDE
1
Open "Search Menu"
From Stop or Play mode, press the Search button.
2
Select "Direct Time Search"
Using the joystick, move the selection arrow to "Direct
Time Search," then push right to select.
3
Select +/– Counter Value
Press 1 for positive or 2 for negative counter values.
4
Enter the Time
Use the number keys (0–9) to enter the desired time in
hours, minutes, and seconds. Press Clear if you need to
backup and re-enter a number.
5
Start the Search
Press the Search button to advance the tape to the
specified time.