Direct Time Search - GoVideo DVR5000 User Manual

Direct Time Search
Use Direct Time Search to
locate a specific tape location
in hours, minutes, and seconds.
This is useful for editing pur-
poses, i.e. you can advance the
tape directly to the beginning of
the desired scene.
1
Open "Search Menu"
From Stop or Play mode, press the Search button.
Blmnk ka_
Dim_m _h
Pelum_
_1€_ -P ToSe_cL
_URNTD(_
,2 Select "Direct Time Search"
Using the joystick, move the selection arrow to "Direct
Time Search," then push right to select.
Pelum_
_1€_ -P ToSe_cL
_URNTD(_
3
Select +/- Counter Value
Press 1 for positive or 2 for negative counter values.
se_ch To : ..:..:..
Er_mr _ unter _due
Enter[ 1 ]. Pos Or [ 2 ]. Neg
prm CLEARToCorte=
P,_B_U _ Qui[
4
Enter the Time
Use the number keys (0-9) to enter the desired time in
hours, minutes, and seconds. Press Clear if you need to
backup and re-enter a number.
Er_mr _ unter _due
Enter[ 1 ]. Pos Or [ 2 ]. Neg
prm CLEARToCorte=
P,_B_U _ Qui[
5 Start the Search
Press the Search button to advance the tape to the
specified time.
94
DVD-VCR USER'S GUIDE