Dts Decoder Setting - GoVideo DVR5000 User Manual

If your A/V receiver is
equipped with a DTS decoder,
your DVD-VCR can output
DTS digital sound, but you
MUST enable this feature in
the menu system.
NOTE: Select "Yes" ONLY if
you have connected a DTS-
equipped A/V receiver to the
Digital Output (optical or
coaxial) on the DVD-VCR back
panel.
1
Open "Setup Menu"
Press the Setup button.
2
Select "DVD Setup"
Using the joystick, move the selection arrow to "DVD
Setup," then push right to select.
3
Select "Language/Audio Setup"
Move the selection arrow to "Language/Audio Setup,"
then push right to select.
4
Set "DTS Decoder"
Move the selection arrow to "DTS Decoder," then push
right to select from the following options:
• No - Indicates that your A/V receiver is NOT
equipped with a DTS decoder.
• Yes – Indicates that your A/V receiver is equipped
with a DTS decoder.

DTS Decoder Setting

6 - SPEAKER SETUP
41