Dolby Digital Decoder Setting - GoVideo DVR5000 User Manual

Dolby Digital Decoder Setting

If your A/V receiver is
equipped with a Dolby Digital
decoder, your DVD-VCR can
output Dolby Digital 5.1
sound, but you MUST enable
this feature in the menu system
to prevent damage to your
speakers.
NOTE: Select "Yes" ONLY if
you have connected a Dolby
Digital-equipped A/V receiver
to the Digital Output (optical
or coaxial) on the DVD-VCR
back panel.
40
DVD-VCR USER'S GUIDE
1
Open "Setup Menu"
Press the Setup button.
2
Select "DVD Setup"
Using the joystick, move the selection arrow to "DVD
Setup," then push right to select.
3
Select "Language/Audio Setup"
Move the selection arrow to "Language/Audio Setup,"
then push right to select.
4
Set "Dolby Dig. Decoder"
Move the selection arrow to "Dolby Dig. Decoder,"
then push right to select from the following options:
• Yes – Indicates that your A/V receiver is equipped
with a Dolby Digital decoder.
• No - Indicates that your A/V receiver is NOT
equipped with a Dolby Digital decoder.