GoVideo DVR5000 User Manual page 117

9
Set "Cable Box Output"
Move the selection arrow to "Cable Box Output," then
push right to select from the following options:
• Ch ## — Indicates that your cable box is connected
to the "IN (FROM ANT.)" jack on the DVD-VCR
back panel and set to the channel that your cable
box outputs. Use the number keys to set the appro-
priate channel.
• Line 1 — Indicates that your cable box is connected
to the front line inputs.
• Line 2 — Indicates that your cable box is connected
to the rear line inputs.
10
Cable Box Control Operation
With Cable Box Control enabled, you can set the
Record Source for Timer Recordings to the actual cable
channel you wish to record (see page 79). The Cable
Mouse will send the proper channel to your cable box
automatically.
• If Cable Box Control is disabled, you must set the
Record Source to Channel 2, 3, or 4—whichever
your cable box uses—and manually select the
channel you wish to record on the cable box.
APPENDIX A - ADVANCED CONNECTIONS 107