TKH PD2024W Quick Start Manual

PD2024W
4MP Network PTZ Pendant Camera
Quick Start Guide
Unpack
Subject to modification. Actual product and accessories may differ in appearance.
Connect and close
© TKH Security B.V. 2024 | Version 1 (20240725) | PD2024W-QS-EN
Find additional manuals, the
datasheet, the EU Declaration of
Conformity, and the latest firmware
for this product at:
tkhsecurity.com
Connectors
Reset button and MicroSD card
MicroSD card
It is not recommended to continuously (24/7) record with the
micro-SD card, as the camera may not support long-term
continuous data read/write. Contact the manufacturer of the
micro-SD card for information regarding the reliability and
the life expectancy.
Press and hold Reset for 10s during the power up cycle.
WARNING: This will restore ALL factory defaults, including
network and login settings, and cannot be undone.
Anti-drop cable
Installation handle
Power 24VAC
Ethernet RJ45
Analog Vout BNC
Serial data
RS485-2
Audio LINE IN
Audio LINE OUT
Alarm dig IN 7x
Digital OUT 2x
Installation Notices
CAUTION:
Installation shall be performed by qualified personnel only.
Installation shall be in acccordance with local procedures.
Installation with PoE shall be in unexposed networks.
Battery replacement shall not be applied in view of the risk
of explosion. If you use an external power supply, contact
TKH Security to make sure that the power supply has the
proper power specifications. Make sure that the power
supply complies with LPS requirements. When installing the
camera, hook up the camera with the anti-drop chain of the
Reset button
pendant to the anti-drop ring. For more inforation, visit us at
tkhsecurity.com.
WARNING:
For "PoE" input connection, use only with UL listed I.T.E
with "PoE" output. Description for the "PoE" is intended to
be connected to not exposed (outside plant) networks or
equivalent statement in installation instructions. This device
conforms to the Hi-PoE standard.
Mounting