Table of Contents
Advertisement
Quick Links
Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
PD1024, PD2024
User manual
Status:
v1.0
Author:
Onno Verkerk
TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com
PD1024, PD2024
User manual
July 4, 2024
Werner von
Siemensstraat 7
Page 1
2712 PN Zoetermeer
The Netherlands
4-Jul-24
Advertisement
Table of Contents
Related Manuals for TKH PD1024
Summary of Contents for TKH PD1024
- Page 1 Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries PD1024, PD2024 User manual Status: v1.0 4-Jul-24 Author: Onno Verkerk TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 2 The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries Revision history Date Remarks 03-jul-2024 Initial version 1.0 TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 3 Any brand names mentioned in this manual are registered trademarks of their respective owners. Liability TKH Security accepts no liability for claims from third parties arising from improper use other than that stated in this manual. Although considerable care has been taken to ensure a correct and suitably comprehensive description of all relevant product components, this manual may nonetheless contain errors and inaccuracies.
- Page 4 In the event of any conflicts between this manual and the applicable law, the latter prevails. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 5: Table Of Contents
4.4.3 Overlay and Capture ........................29 4.4.4 Face Recognition Algorithm Parameters ..................30 Face Comparison ........................32 4.5.1 Set Face Picture Library ......................32 4.5.2 Set Face Picture Comparison ....................... 34 TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 6 Set Scheduled Tasks ........................63 Set Power Off Memory ......................64 5.10 Set PTZ Priority .......................... 64 5.11 Set Privacy Mask ........................65 5.12 Set Rapid Focus ......................... 65 TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 7 7.1.4 Bitrate Type and Max. Bitrate ...................... 78 7.1.5 Video Quality ..........................78 7.1.6 Frame Rate ..........................78 7.1.7 Video Encoding .......................... 78 7.1.8 Profile ............................80 7.1.9 I-Frame Interval ......................... 80 TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 8 8.2.3 Playback and Download Video ....................100 Capture Configuration ......................101 8.3.1 Capture Automatically ......................101 8.3.2 Capture Manually ........................102 8.3.3 View and Download Picture ...................... 102 TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 9 Trigger Recording ......................127 Flashing Light ....................... 127 10.2.7 Audible Warning ......................128 10.2.8 Alarm Server ........................ 129 10.2.9 Network Settings ...................131 11.1 TCP/IP ............................. 131 11.2 Port Mapping .......................... 132 TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 10 Reboot ............................ 146 12.3 Upgrade ..........................146 12.4 Restore and Default ......................... 147 12.5 Search and Manage Log ......................147 12.6 Import and Export Configuration File ..................147 TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 11 Set IEEE 802.1X ......................154 12.13.6 SSH ..........................155 Control Timeout Settings ....................155 12.13.7 Certificate Management ....................155 12.13.8 TLS ..........................159 12.13.9 12.13.10 User and Account ......................159 TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 12 User manual Page 12 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 13: Overview
The device compares captured faces with pictures in the library, and outputs the result. Event The device detects basic events and multiple smart events, such as line crossing detection, intrusion detection, region entrance detection, region exiting detection, etc. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 14: System Requirement
1024 × 768 resolution or higher Internet Explorer 10 and above version, Apple Safari 12 and above version, Web Browser Mozilla Firefox 52 and above version, Google Chrome 57 and above version. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 15 User manual Page 15 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 16: Device Activation And Accessing
4. Click OK to complete activation and enter Live View page. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 17: Activate Via Sdm2 Device Manager Software
SDM2 Device Manager is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start ● Get the SDM2 Device Manager software from the TKH Security website (tkhsecurity.com> Products> Services> Knowledge Base> Support software> SDM2 Device Manager), and install the SDM2 Device Manager according to the prompts. -
Page 18: Access Device Via Web Browser
Web Browser Operation ● Internet Explorer 10+ Follow pop-up prompts to ● Google Chrome 57 and earlier Windows version complete plug-in installation. ● Mozilla Firefox 52 and earlier TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 19: Admin Password Recovery
If you forget the admin password, you can reset the password by clicking Forget Password on the login page after completing the account security settings. You can reset the password by setting the security question or email. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 20: Illegal Login Lock
Illegal Login Attempts When your login attempts with the wrong password reach the set times, the device is locked. Locking Duration The device releases the lock after the setting duration. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 21 User manual Page 21 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 22: Smart Function
For alarm output settings, refer to Automatic Alarm. Audible Alarm Output For audible alarm output settings, refer to Set Audible Alarm Output. Alarm Server For alarm server settings, refer to Alarm Server. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 23: Set Camera Info
Go to VCA → Select Application to select Road Traffic, and click Next to enable the function. Steps 1. Go to VCA → Set Application → Road Traffic → Rule. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 24 1) Click Arming Schedule and Linkage Method. 2) Select a detection scene and draw the time bar in the time table. Different scenes are marked with different colors on schedule. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 25: Picture Settings
The font color of overlaid texts. Background Color The background color for the overlaid texts. Text Overlay Check the desired items to display on the picture. The display sequence is adjustable. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 26: Set Armed License Plates
The device switches day/night mode according to the brightness of license plates in the scene. Auto day/night switch should be enabled first in Configuration → Image → Display Settings → Day/Night Switch for this function to take effect. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 27: Face Capture
Go to Playback → Picture to search and view the captured pictures. Go to Application Display → Smart Display → Display Alarm to see currently captured face pictures. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 28 The Min. Pupil Distance and the Max. Pupil Distance are used to improve detection accuracy. Only targets whose pupil distance are between the maximum distance and the minimum distance trigger the capture. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 29: Operate Manual Face Capture
Display VCA Info. on Stream Display smart information on stream, including the target and rules information. Display Target Info. on Alarm Picture Overlay the alarm picture with target information. Target Picture Settings TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 30: Face Recognition Algorithm Parameters
It refers for the quality of face to trigger capture and alarm. Higher value means better quality should be met to trigger capture and alarm. Capture Times It refers to the capture times a face will be captured during its stay in the detection area. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 31 The device captures the target face according to the set times. Face Exposure Enable the function, and the device automatically adjusts exposure level when human faces appear in the scene. Reference Brightness TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 32: Face Comparison
1. Go to VCA → Face Comparison → Set Application → General Settings → Face Picture Library. 2. Create a face picture library. 1) Click to add a face picture library. 2) Input library name, threshold and remarks. Threshold TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 33 Modeling process builds up face model for each face picture. Face model is compulsory for face picture comparison to take effect. Modeling Select one or more face pictures, and click Modeling. Batch Modeling Select a face picture library, and click Batch Modeling. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 34: Set Face Picture Comparison
Comparison Timeout and Comparison Times. 6. Click to set arming schedule for the selected face library. Set arming schedule. See Set Arming Schedule. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 35: View Face Comparison Result
3. Select a configuration mode. Normal One detection scene is allowed to set. The device captures targets in the scene in the set arming schedule. See Normal Mode Settings for details. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 36: Overlay And Capture
You can check desired items (Device No., Camera Info. and Capture Time) and adjust their order to display on captured pictures by See Set Camera Info to set Device No. and Camera Info. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 37: Advanced Parameters
Max. Capture Interval. Quick Shot Threshold It refers to the quality of face to trigger quick shot. Max. Capture Interval It describes the max. time occupation for one quick shot. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 38: Person Arming
● Select Person Arming on VCA Resource page to show the configuration page. ● Target location information can be uploaded only when you set the GPS Calibration properly. See GPS Calibration for instructions. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 39: Device Auto Person Arming
3) Set the arming schedule and linkage method for the selected library. Note The arming schedule and linkage method for different libraries are allowed to set independently. 4. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 40 The time the device stays at the position where the target tracking fails. Report Interval of Tracking Info The alarming information upload interval during tracking. Wait to Stop Tracking If Low Validity TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 41: Manual Person Arming
3. Click or frame a person as the target. The device starts to track the target and upload related data. 4. Click to stop manual person arming. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 42: Capture Settings
Display VCA Info. on Stream Display smart information on stream, including the target and rules information. Display Target Info. on Alarm Picture Overlay the alarm picture with target information. Target Picture Settings TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 43 It refers to the capture times a face will be captured during its stay in the detection area. Remove Duplicated Faces This function can filter out repeated captures of certain face. Similarity Threshold for Duplicates Removing TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 44 Min. Duration The extra time the device keeps the face exposure level after the face disappears in the scene. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 45: Intelligent Traffic Event (Its)
IP address is required. Note A memory card should be installed in the device. Memory card settings should be completed. See Memory Card for instructions. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 46: Vehicle Detection
6. Enter a Scene Name. 7. Select the Scene Direction according to the traffic direction in the scene. 8. Click Save. 9. Optional: Repeat the steps above to set multiple detection scenes. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 47 4. Optional: Click on an arming period and adjust the arming hours. – Enter the start time and end time and click Save to fine-tune the arming period. – Click Delete to delete the arming period. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 48: Its Linkage And Alarm
Upload the data of vehicle detection to an FTP server. Before You Start The FTP server is configured. Steps 1. Go to VCA → Set Application → ITS (Intelligent Transportation System) → Advanced Settings → FTP Host TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 49: Vehicle Arming
The device receives orders from the platform and performs arming tasks. Note Platform-Controlled To use platform-controlled vehicle arming, you need to build a platform with Vehicle Arming the SDK tool provided on our website. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 50 The scene is added to the Arming Scene List. 4. Edit the scene name and moving direction of the vehicles. 5. Repeat the steps to add other scenes. 6. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 51: Advanced Settings
The validity is an internal parameter that helps judge whether the device should keep tracking or not. This parameter is the waiting time level before the device stops tracking when the validity is low. Larger value means longer waiting time. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 52 The minimum duration to maintain the exposure level for the license plates when they are detected. Arming Schedule Set the start time and end time when the license plate exposure settings are valid. 4. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 53: Display Alarm
Adjust the volume of live view. Move the slider to right to turn up the volume and left to turn down the volume. Move to the left end to mute the live view. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 54 Detect Features Click and choose Detect Features. Check the corresponding checkbox to display the features of the detection target. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 55 User manual Page 55 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 56: Ptz
You can set Auto Scan Speed in Configuration → PTZ → Basic Settings. The higher the value you set, the faster the device pans. Drag the slider to adjust the speed of pan/tilt movement. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 57 You can set Zoom Limit in Configuration → Image → Display Settings → Other to limit the maximum value of the total zoom (digital zoom and optical zoom). TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 58: Set Preset
Click the button to call the preset. Click the button to delete the preset. Note You can delete all presets in Configuration → PTZ → Clear Config. Check Clear All Presets, and click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 59: Special Presets
Call pattern 2 Start panorama scan Call pattern 3 Call patrol 5 Call pattern 4 Call patrol 6 One-touch patrol Call patrol 7 Day/Night Auto Call patrol 8 Wiper TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 60: Set Patrol Scan
Call the patrol. Stop patrolling. Delete the patrol. Note You can delete all patrols in Configuration → PTZ → Clear Config. Check Clear All Patrols, and click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 61: Set One-Touch Patrol
Delete the selected pattern scan. Note If you need to delete all the pattern scans, go to Configuration → PTZ → Clear Config, and check Clear All Patterns, and click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 62: Set Limit
2. Move the device to the needed position by manually controlling the PTZ control buttons. 3. Click Set to save the information of initial position. View The device moves to the set initial position. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 63: Set Park Action
3. Select the task type and set the period. For setting the period, refer to Set Arming Schedule. 4. Repeat step 3 to set more than one scheduled tasks. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 64: Set Power Off Memory
It refers to the time interval of PTZ operation controlled by different signals. When the operation with high priority is finished, the low priority signal controls the device after the setting interval. 3. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 65: Set Privacy Mask
2) Set the Rate and the Calibration Point Amount of the added scene. Note More calibration points may increase calibration accuracy, but more focusing time is required. The default amount is recommended. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 66: Gps Calibration
2) Click and click on the calibration point on the live image. The selected point is zoomed in and placed in the center of the image. 3) Click again. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 67: Verify Calibration
PTZ position based on the longitude and latitude you input. If the two rectangles are close to each other, then the GPS calibration succeeds. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 68: Set Device Position
1. Select the PT Mode as Manual. 2. Adjust the tilt position of the device to 0 by controling the up arrow and down arrow on the PTZ panel. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 69 3. Adjust the pan position to show the live view of the north direction by controling the left arrow and right arrow on the PTZ panel. 4. Click Set as North. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 70 User manual Page 70 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 71: Live View
– When you access the device via Internet Explorer, you can select Webcomponents or QuickTime. – When you access the device via the other browsers, you can select Webcomponents, QuickTime or MJPEG. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 72: Start Digital Zoom
2. Drag the mouse on the image to select a desired rectangle area. The width pixel and height pixel are displayed on the bottom of the live view image. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 73: Light
The interval between two successive wiping actions. Note Auto mode is only available for device that supports rain-sensing auto wiper. In auto mode, the wiper works when rain drops on the window. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 74: Lens Initialization
The live view image may be displayed abnormally according to the network conditions. In different network environments, you can adjust the transmission parameters to solve the problem. Steps 1. Go to Configuration → Local → Live View Parameters. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 75 You can set the frame rate manually. In poor network environment, you can reduce the frame rate to get a fluent live view. But the rule information may cannot display. 3. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 76 User manual Page 76 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 77: Video And Audio
Select the content (video and audio) that should be contained in the stream. Video Stream Only video content is contained in the stream. Video&Audio Video content and audio content are contained in the composite stream. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 78: Resolution
Note that higher frame rate requires higher bandwidth and larger storage space. 7.1.7 Video Encoding It stands for the compression standard the device adopts for video encoding. Note Available compression standards vary according to device models. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 79 You can adjust the parameter to a higher value if the video quality is less satisfactory. Max. average bitrate should not be higher than max. bitrate. Note When H.265i is enabled, Video Quality, I Frame Interval, Profile and SVC are not configurable. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 80: Profile
SVC enables forward compatibility for older hardware: the same bitstream can be consumed by basic hardware which can only decode a low-resolution subset, while more advanced hardware will be able decode high quality video stream. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 81: Smoothing
You can output audio through line out. You can adjust the output volume according to your needs. Note ● Connect audio output device according to your needs. ● This function is only supported by certain models. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 82: Environmental Noise Filter
1. Go to Configuration → Video/Audio → ROI. 2. Check Enable. 3. Select Stream Type. 4. Select Region No. and click to draw ROI region on the live view. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 83: Target Cropping
● Some models support target cropping. Refer to the actual device for details. ● This function is mutually exclusive with some functions. After enabling target cropping, some functions will fail. Refer to the actual device for details. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 84: Display Info. On Stream
You can limit the changing ranges of iris, shutter and gain by setting Max. Iris Limit, Min. Iris Limit, Max. Shutter Limit, Min. Shutter Limit and Limit Gain for better exposure effect. Iris Priority TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 85 When the distance between the scene and lens is shorter than the Min. Focus Distance, the lens does not focus. Compatible This mode is only recommended for indoor devices with a bubble when you cannot get a clear image with other options. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 86 Adjust the upper limit of supplement light power. For devices with both white light and IR light, white light and IR light brightness limit can be set separately. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 87 Set the DNR level to control the noise reduction degree. The higher level means stronger reduction degree. Expert Set the DNR level for both space DNR and time DNR to control the noise reduction degree. The higher level means stronger reduction degree. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 88: Image Parameters Switch
You can set a preset to switch the image to a linked scene. Steps 1. Check Link to Preset. 2. Select a preset. 3. Check and set a time period and a linked scene mode. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 89: Mirror
The two most common video standard used are NTSC and PAL. In NTSC, 30 frames are transmitted each second. Each frame is made up of 525 individual scan lines. In PAL, 25 frames are TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 90: Osd
Set camera name, date, week, and their related display formats. Format Settings Set OSD parameters, such as Display Mode, OSD Size, Font Color, and Alignment. Text Overlay Set customized overlay text on image. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 91 User manual Page 91 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 92: Video Recording And Picture Capture
4. Optional: Encrypt the memory card. 1) Click Encrypted Format. 2) Set the encryption password. 3) Click OK. When the Encryption Status turns to Encrypted, the memory card is ready for use. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 93 Unencrypted Memory Card to format and set the memory card. All existing contents will be removed. 4. Optional: Define the Quota of the memory card. Input the percentage for storing different contents according to your needs. 5. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 94 ● The memory card can only be read and written when it is unlocked. ● If the device, which adds a lock to a memory card, is restored to the factory settings, you can go to HDD TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 95: Set Ftp
IP address_channel number_capture time_event type.jpg (e.g., 10.11.37.189_01_20150917094425492_FACE_DETECTION.jpg). Or you can customize it by adding a Custom Prefix to the default naming rule. 4. Optional: Check Enable Automatic Network Replenishment. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 96: Set Nas
7. Optional: Configure the Net HDD. Edit Click to edit the parameter setting. Delete Delete the Net HDD. ● Click ● Select the Net HDD, click Delete. 8. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 97: Emmc Protection
The key to log in to the cloud video manager. SecretKey The key to encrypt the data stored in the cloud video manager. User Name and The user name and password of the cloud video manager. Password TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 98: Video Recording
When alarm input is enabled and trigger recording is selected as linkage method, the video is recorded after receiving alarm signal from external alarm input device. Motion | Alarm TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 99: Record Manually
2. Set the Record File Size and saving path to for recorded files. 3. Click Save. 4. Click in the live view interface to start recording. Click to stop recording. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 100: Playback And Download Video
Note Go to Configuration → Local → Save downloaded files to, view and change the saving path of downloaded video files. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 101: Capture Configuration
Note The resolution of the captured picture is the same as the resolution of the captured picture stream. You can select Stream Type in Advanced. 5. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 102: Capture Manually
– Click Download All to download all the pictures. Note Go to Configuration → Local → Save snapshots when playback to, view and change the saving path of captured pictures when playback. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 103 User manual Page 103 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 104: Event And Alarm
If the sensitivity is set to 0, motion detection and dynamic analysis do not take effect. 3. Click . Click and drag the mouse on the live video, then release the mouse to finish drawing one area. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 105 The system switches day/night mode according to the schedule. It switches to day mode during the set periods and switches to night mode during the other periods. Sensitivity TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 106: Set Video Tampering Alarm
3. Set the Sensitivity. The higher the value is, the easier to detect the area covering. 4. Click and drag the mouse in the live view to draw the area. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 107: Set Alarm Input
Alarm signal from the external device triggers the corresponding actions of the current device. Before You Start Note This function is only supported by certain models. Make sure the external alarm device is connected. See Quick Start Guide for cable connection. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 108: Set Exception Alarm
Illegal Login Incorrect user name or password is entered. Abnormal Reboot The device reboots abnormally. 3. Refer to Linkage Method Settings for setting linkage method. 4. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 109: Set Audio Exception Detection
The device triggers alarms when its position changes because of shock or vandalism. Steps 1. Go to Configuration → Event → Event and Detection → Vandal-proof Alarm. 2. Set vandal-proof alarm parameters. Sensitivity TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 110: Smart Event
4. Adjust the live image to the desired scene by using PTZ control buttons. 5. Draw detection area. 1) Click 2) Click on the live image to draw the boundaries of the detection area, and right click to complete drawing. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 111 9. Optional: Click Add, and repeat above steps to set other rules. Note Up to 4 rules can be set. 10. Set arming schedule. See Set Arming Schedule. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 112: Set Line Crossing Detection
Only the object crossing the configured line from side A to side B can be detected. B->A Only the object crossing the configured line from side B to side A can be detected. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 113 9. Optional: Click Add, and repeat above steps to set other rules. Note Up to 4 rules can be set. 10. Set arming schedule. See Set Arming Schedule. 11. Set linkage method. See Linkage Method Settings. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 114: Set Region Entrance Detection
It stands for the sensitivity of detecting an target. The higher the value is, the more easily the target is detected. Detection Target You can specify the object type, and the device only detects the selected type of objects. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 115: Set Region Exiting Detection
1. Go to VCA → Set Application → Smart Event → Region Exiting Detection. 2. Check Enable. 3. Optional: Click to lock PTZ control to prevent the interruption from other PTZ related action during configuration. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 116 You can specify the object type, and the device only detects the selected type of objects. Figure 8-7 Draw Area 8. Click Save. 9. Optional: Click Add, and repeat above steps to set other rules. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 117: Set Object Removal Detection
The value of the sensitivity defines the size of the object which can trigger the alarm, when the sensitivity is high, a very small object can trigger the alarm. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 118: Set Unattended Baggage Detection
Before You Start Go to VCA → Select Application to select Smart Event , and click Next to enable the function. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 119 It stands for the time of the objects left in the area. Alarm is triggered after the object is left and stays in the area for the set time period. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 120: Set Tracking Parameters
2. Optional: Check Tuning Mode. Note Tuning mode is to display the information that helps debugging the function. This mode is reserved for technical support. 3. Set the Tracking Duration. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 121: Overlay And Capture
Display Target Info. on Alarm Picture Overlay the alarm picture with target information. Display Rule info. on Alarm Picture The captured target and the configured area will be framed on the alarm picture. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 122 User manual Page 122 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 123: Arming Schedule And Alarm Linkage
● Up to 8 periods can be configured for one day. 4. Click Erase, and drag the time bar to clear selected valid time. 5. Click OK to save the settings. Figure 9-1 Set Arming Schedule TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 124: Linkage Method Settings
2. Set the alarming schedule. For the information about the settings, see Set Arming Schedule. 3. Optional: Click Copy to… to copy the parameters to other alarm output channels. 4. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 125: Ftp/Nas/Memory Card Uploading
Before You Start Set the DNS server before using the Email function. Go to Configuration → Network → Network Settings → TCP/IP for DNS settings. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 126 3 attached alarm pictures about the event with configurable image capturing interval. 5) Input the receiver's information, including the receiver's name and address. 6) Click Test to see if the function is well configured. 3. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 127: Notify Surveillance Center
The rate at which the light flashes. High frequency, medium frequency, low frequency, and normally on are selectable. Brightness The brightness of the light. 3. Set the arming schedule. See Set Arming Schedule for details. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 128: Audible Warning
3. Optional: Click Test to play the selected audio file on the device. 4. Set arming schedule for audible alarm. See Set Arming Schedule for details. 5. Click Save. Note The function is only supported by certain device models. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 129: Alarm Server
HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts the data transmission during communication. 4. Click Test to check if the IP or host is available. 5. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 130 User manual Page 130 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 131: Network Settings
Route advertisement mode requires the support from the router that the device is connected to. DHCP The IPv6 address is assigned by the server, router, or gateway. Manual TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 132: Port Mapping
1. Check Enable UPnP™, and choose a friendly name for the camera, or you can use the default name. 2. Select the port mapping mode to Auto. 3. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 133: Set Manual Port Mapping
When the cameras are connected to the same router, you can configure the ports of a camera as 80, 8000, and 554 with IP address 192.168.1.23, and the ports of another camera as 81, 8001, 555, 8201 with IP 192.168.1.24. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 134: Snmp
Before setting the SNMP, you should download the SNMP software and manage to receive the device information via SNMP port. Steps 1. Go to Configuration → Network → Network Settings → SNMP. 2. Check Enable SNMPv1, Enable SNMP v2c or Enable SNMPv3. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 135: Access To Device Via Domain Name
Enter the domain name in the browser address bar to access the device. By Client Software Add domain name to the client software. Refer to the client manual for specific adding methods. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 136: Access To Device Via Pppoe Dial Up Connection
To solve the inconvenience of the dynamic IP, you need to get a domain name from the DDNS provider (e.g. DynDns.com). Refer to Access to Device via Domain Name for detail information. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 137: Accessing Via Mobile Client
6. Save the settings. 11.6.1.2 Enable Service via SADP Software Guarding Vision This part introduce how to enable Guarding Vision service via SADP software of an activated camera. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 138: Set Up Guarding Vision
● The required verification code is the code you create or change when you enable Guarding Vision service on the camera. ● If you forget the verification code, you can check the current verification code on Platform Access configuration page via web browser. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 139: Http(S)
You can click TLS Settings to set the TLS version that the device supports. Refer to for details. 4. Enter HTTPS Port. 5. Optional: Check HTTPS Browsing to access the device only via HTTPS protocol. 6. Select Server Certificate. 7. Set Web Authentication. Authentication TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 140: Multicast
1. Go to Configuration → Network → Network Service → RTSP. 2. Enter Port. 3. Set Multicast parameters. Stream Type The stream type as the multicast source. Video Port TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 141: Set Srtp
Audio Port The audio port of the selected stream. 4. Select Server Certificate. 5. Select Encrypted Algorithm. 6. Click Save. Note ● Only certain device models support this function. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 142: Multicast
Mozilla Firefox 52 and its above version to visit the device. Otherwise, live view, image capture, digital zoom, etc. cannot be used. Go to Configuration → Network → Network Service → WebSocket(s) to set parameters, and click Save. WebSocket TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 143: Tcp Acceleration
1. Go to Configuration → Network → Platform Access → ISUP. 2. Optional: Select an access center. 3. Check Enable. 4. Select a protocol version and enter related parameters. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 144: Set Open Network Video Interface
4) Select a server certificate to make sure the data transmission security. You can click Certificate Management to add a certificate. Refer to Certificate Management for details. 4. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 145 User manual Page 145 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 146: System And Security
Locate the exact path of the upgrade file. Firmware Directory Locate the directory which the upgrade file belongs to. 3. Click to select the upgrade file. 4. Click Upgrade. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 147: Restore And Default
2) Click Export and input the encryption password to export the current configuration file. 3) Set the saving path to save the configuration file in local computer. 2. Import configuration file. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 148: Export Diagnose Information
Alarm Quality Statistics Report type, alarm target and start time. 3. Click Search. The data information that match the conditions will be displayed. 4. Optional: Click Export to save the data information to the local device. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 149: View Open Source Software License
5. Click Save. 12.11.2 Synchronize Time by Satellite Note This function varies depending on different devices. Steps 1. Enter Configuration → System → System Settings → Time Settings. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 150: Set Ntp Server
RS-485 is used to connect the device to external device. You can use RS-485 to transmit the data between the device and the computer or terminal when the communication distance is too long. Before You Start Connect the device and computer or termial with RS-485 cable. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 151: Security
Add a new IP address or IP address range to the list. Modify the selected IP address or IP address range in the list. Delete the selected IP address or IP address range in the list. 5. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 152: Set Mac Address Filter
This function is only supported by certain camera models. 1. Go to Maintenance and Security → Maintenance → Security Audit Log. 2. Select log types, Start Time, and End Time. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 153: Set Qos
Network can identify the priority of data transmission. The bigger the DSCP value is, the higher the priority is. You need to set the same value in router while configuration. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 154: Set Ieee 802.1X
● If you set the Protocol to EAP-TLS, select the Client Certificate and CA Certificate. ● If the function is abnormal, check if the selected certificate is abnormal in Certificate Management. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... -
Page 155: Ssh
The device has default self-signed server/client certificate installed. The certificate ID is default. Create and Install Self-signed Certificate Steps 1. Go to Maintenance and Security → Security → Certificate Management. 2. Click Create Self-signed Certificate. 3. Input certificate information. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 156 The imported certificate is displayed in the Server/Client Certificate list. If the certificate is used by certain function, the function name is shown in the column Functions. 9. Optional: Click Property see the certificate details. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 157 The input certificate ID cannot be the same as the existing ones. 4. Click to select the certificate file. 5. Click Save. The imported certificate is displayed in the CA Certificate list. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 158 ● If you set the reminding day before expiration to 1, and the detection time to 10:00, and the certificate will expire in 9:00 the next day, the camera will remind you in 10:00 the first day. 3. Click Save. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
-
Page 159: Tls
The administrator has the authority to all operations and can add users and operators and assign permission. User Users can be assigned permission of viewing live video, setting PTZ parameters, and changing their own passwords, but no permission for other operations. Operator TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com... - Page 160 The administrator can set the maximum number of users logging into the system through web browser simultaneously. Go to Configuration → System → User Management → Online Users, click General, and set Simultaneous Login. TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
- Page 161 User manual Page 161 2712 PN Zoetermeer The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries TKH Security B.V. | +31 79 363 8111 | info.nl@tkhsecurity.com | tkhsecurity.com...
Need help?
Do you have a question about the PD1024 and is the answer not in the manual?
Questions and answers