Start-Up And Mip-Mep Test Procedure; Entering Patient Data - Sibelmed DATOSPIR TOUCH User Manual

Activate desired graphics options and enter the delay time by
pressing on them. A
Escapes this screen and moves back to the previous one
Validates the input data and goes to the next screen.
The default value for the delay is 1.0 s, although the user can on
the calculation of the measurement since no value in this first
second (or the time configured by the user) is taken into account.
The options for graphics allow saving the graphics in the database
and/or print the curves of MEP or MIP.

1.3. START-UP AND MIP-MEP TEST PROCEDURE

Access to the MIP-MEP test by pressing
screen.

1.3.1. ENTERING PATIENT DATA

When accessing the MIP-MEP Program, enter the patient details.
Consult the section
userÕs manual of the DATOSPIR TOUCH spirometer.
After entering the patient data, press ENTER to validate them and
go to the test screen.
If a performed test is still in memory, the program will go directly
to the next screen (section 1.3.2).
MIP-MEP module userÕs manual
will appear on the option selected
ENTERING PATIENT DATA
8
from the main
,
of the general
511-BI0-MU2 ¥ REV. 2.02