User Tools Menu; System - Ricoh 5490 Operating Instructions Manual

User Tools Menu

Reference
For accessing the user tools, ⇒ P.135 "Accessing the User Tools".

1. System

No. Mode
1 Auto Reset
2 R. Cntr. Display
3 Reset R. Counter
4 mm/inch
5 Language on LCD The language used for panel display messages can be selected.
6 Time Setting
Description
The machine returns to its initial condition automatically after
your job is finished. The automatic reset time can be set from 1 to
5 minutes or off (0 minute).
Note
❒ Default: Off
Use to display the total number of masters and prints.
Note
❒ A trial print delivered to the paper delivery tray after press-
ing the {Start} key will not be counted.
Choose whether the total number of masters and prints is reset.
Note
❒ Default: Not clear
Choose the units of measurement shown on the panel display.
Note
❒ Default:
• Metric version: mm
• Inch version: inch
Note
❒ Default: English
Use to set the machine's internal clock.
Note
❒ The clock must be adjusted if you change the clock to daylight
saving time/summer time, or return to standard time.
Reference
For setting the clock, ⇒ P.150 "1-6 Time Setting".
User Tools Menu
4
137