Ricoh 5490 Operating Instructions Manual page 109

Diagonal line method
Note
❒ A diagonal line must be drawn through the area that you wish to edit.
A
Put the command sheet on top of the original.
B
Draw a line using a felt tip pen (black, red or blue) with a thickness of at
least 1mm.
Note
❒ Make sure there is no break in the line.
❒ The diagonal line can be drawn from left to right or vice versa.
❒ Draw the line at least 2mm, 0.08", away from the image so that the whole
image can be recognized.
c
d
a, b, c, d = 2mm, 0.08"
ZM-20
ZM-21
a
b
GRCOMM1E
Command Sheets for Make-Up Printing
1
89