Gateway Solo 2100 User Manual page 55

Multimedia notebook

Hide thumbs Also See for Solo 2100:

Table of Contents

Option

S e r i a l p o r t

I R p o r t

Parallel port address

Parallel port mode

D i s k e t t e c o n t r o l l e r

On-board IDE adapter

On-board stereo sound

I/O channel

MPU channel

IRQ channel

DMA channel low

DMA channel high

Table 4. Integrated Peripherals Menu Options

Press Esc when you have finished using the sub-menu, or wish to return to

the main Advanced menu.

Plug & Play OS

Set to Yes for Windows 95. Set to No if you are using a different operating

system, or a PCMCIA card that needs real mode drivers (does not already

have Windows 95 drivers).

Reset configuration data

Be careful with this setting, since this option clears system configuration at

the next boot if set to Yes.

Large disk access mode:

Set to On if your operating system is DOS or Windows. Set to Off if you are

using any other operating system.

Press the Esc key to access the Exit menu and accept/discard changes. Press

F9 to return to the factory defaults, or F10 to return to the previous settings.

Use the Right Arrow key to tab over to the next screen.

To Change Setting