Gateway Solo 2100 User Manual page 40

40 Gateway Solo™ 2100 Multimedia Notebook
To connect the optional Gateway 2000 Solo™ mini-docking station:
1 . Save all work.
2 . Close the lid.
3 . Open the longer of the two port doors at the rear of the system. The port
4 . Open the handle on the mini-docking station.
à
5 . Place the front edge of the mini-docking station under the rear of the
See page 10.
6 . Close the handle on the mini-docking station to secure the connection.
7 . Connect peripherals to the ports on the mini-docking station.
8 . Open the lid
Gateway Solo™ 2100 Multimedia Notebook
Gateway Solo™ 2100 Multimedia Notebook
Figure 40. Connecting the Mini-Docking Station
To disconnect the Gateway 2000 Solo™ mini-docking station:
1 . Open the handle on the mini-docking station.
2 . Lift the system up off the retaining pins.
3 . Move the mini-docking station away from the system.
Note:
docking station for future use.
door will slide into the system leaving a flush mounting area.
system. The two mini-docking station retaining pins will settle into the
two retaining pin guide holes on the insides of the raised rubber feet.
Remember, you can leave the peripherals connected to the mini-
Mini-docking
station handle
Mini-docking
station
Mini-docking
station