Playing An Audio Cd - Gateway Solo 2100 User Manual

Playing an Audio CD

The Gateway Solo™ 2100 Multimedia Notebook contains all the key features
needed to enjoy your favorite audio CDs.
Note:
can open the CD-ROM tray.
To play an audio CD:
à
1 . Make sure the CD-ROM drive module is installed in the modular option
See page 32.
2 . Press the eject button on the front of the CD-ROM drive module.
3 . Gently pull the CD-ROM tray fully open and place the audio CD into the
4 . Push in the CD-ROM tray until it closes completely.
5 . The CD will start playing automatically.
6 . Click on the CD Player option that appears in the task bar along the
7 . Slide the mouse pointer slowly over the control buttons on the CD Player
8 . Click on the Eject button in the CD Player screen, or press the eject but-
9 . Gently pull the CD-ROM tray fully open and remove the CD; then close
Experiment with the different settings in the CD Player screen to find the
ones that work best for you.
There must be power (either battery or AC) to the system before you
b a y .
t r a y .
bottom of the display, or click on Start, Programs, Accessories, Multimedia,
and CD Player to access the CD Player screen. You can change music
tracks, view playing times, control the volume, set preferences, define a
play list and even set the system to continuous or random play through
t h i s s c r e e n .
screen to display the function of each button.
ton on the front of the CD-ROM drive when you have finished listening.
the tray completely.
User's Guide 45