Advertisement
Quick Links
Mini-Type 10/100/1000M/2.5G/5G/10GBase-TX to 1.25G/2.5G/5G/10GBase-SFP Plus Ethernet
Package Content
⚫
Gigabit Ethernet Media Converter x 1
⚫
1A 12VDC power adapter x 1
⚫
Quick Start Guide x 1
Installation
Interface
1.
⚫
RJ-45 interface: The transmission media adopts CAT5 or CAT5e twisted-pair with maximum
length up to 100meters (330feets).
⚫
Fiber interface: fiber interface is of duplex mode type, including two interfaces, namely TX
and RX. When the two sets of optical transceiver are interfaced or connected to switch
with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct
butting for single optical fiber transceiver module).
⚫
Power supply interface: The AC/DC power adaptor is connected to DC-input jack of media
converter.
2. Connection
The network device (IP camera, wireless AP, VoIP phone, etc.) with RJ-45 interface is connected
to RJ-45 jack of media converter through twisted-pair. And the multi/single mode optical fiber is
connected to SC/ST fiber interface of the optical transceiver module. Then connect the AC power
Quick Installation Guide
IEC1212X-S
Media Converter, Auto-Negotiation
Quick Installation Guide
IEC1212X-S / version 1.1
OT Systems Ltd. | www.ot-systems.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for OTS IEC1212X-S
Summary of Contents for OTS IEC1212X-S
- Page 1 Quick Installation Guide IEC1212X-S / version 1.1 Quick Installation Guide IEC1212X-S Mini-Type 10/100/1000M/2.5G/5G/10GBase-TX to 1.25G/2.5G/5G/10GBase-SFP Plus Ethernet Media Converter, Auto-Negotiation Package Content ⚫ Gigabit Ethernet Media Converter x 1 ⚫ 1A 12VDC power adapter x 1 ⚫ Quick Start Guide x 1...
- Page 2 Quick Installation Guide IEC1212X-S / version 1.1 adaptor, the media converter will work. The corresponding LED is on for correct connection (See the table below for the LED indicator lamp). Description for LED indicator lamp LED indicator lamps serve as device monitoring and trouble display. The following is the description for each LED indicator lamp.
- Page 3 Quick Installation Guide IEC1212X-S / version 1.1 3. ALS: Automatic laser shutdown is a procedure to automatically shut down the laser when there is no input light and stop emitting optical signals. 4. SFP: Optical Fiber Port Notes: When LFP is enabled, ALS is disabled automatically; When ALS is enabled, LFP is disabled automatically.
Need help?
Do you have a question about the IEC1212X-S and is the answer not in the manual?
Questions and answers