Global Industrial 282490 Manual

ADJUSTABLE HEIGHT SERVICE STOOL WITH HANDLE
SAVE THIS MANUAL FOR FUTURE REFERENCE
DESCRIPTION
Sit-Stand seat height is adjustable from 23˝ to 33˝. Seat is 14˝
wide and 13˝ deep. Seat provides comfort, strength and easy
maintenance. Seat has forward seat tilt. Reinforced round steel
base. Sit-Stand has 300 pound seating capacity.
ASSEMBLY
1. Unpack your Sit-Stand and account for all parts.
2. Place base onto floor and insert lift assembly into center of
base and allow it to wedge firmly into place. Remove black
cap from top of lift assembly. Do not push on button at the top!
3. Install seat on top of lift.
ADJUSTING SEAT ANGLE AND HEIGHT
1. Raise handle under right side of seat and tilt seat to desired
angle. Lower handle to lock seat at desired angle.
2. Raise handle under left side of seat to move seat to desired
height. Lower handle to lock seat at desired height.
GENERAL SAFETY INSTRUCTIONS
• Do not stand on seat.
• Stool must be on level surface to ensure proper stability.
• Only use stool when fully assembled.
• Periodically check fasteners and tighten securely if needed.
• Never use stool if it does not perform according to this
manual.
• Do not exceed stool maximum weight capacity of
300 pounds.
MAINTENANCE
Pneumatic lift in lift assembly is permanently lubricated at
factory and needs no further lubrication. Never lubricate
pneumatic lift. Do not remove clip from bottom of lift assembly.
Contact us immediately if clip is missing or damaged.
Part No. 282490
Model: 282490
INDUSTRIAL SEATING LIMITED WARRANTY
Product is warranted against mechanical or structural failure due
to defective material or workmanship for 1 year. Provided
however, this warranty lasts only so long as you own your
product. If you sell or otherwise transfer the product this
warranty terminates automatically. Products that are damaged
or made unserviceable by accidents, abuse, misuse or are
altered in anyway are not covered by this warranty.
Interion reserves the right to replace or recondition at its option,
any units covered by this warranty. All return shipments require
Material Return Authorization and must be freight prepaid unless
otherwise approved in writing.
If any product covered under this warranty fails to meet the
terms of this warranty or it is in any respect broken, defective
or missing parts, please call us immediately at toll free
1-630-785-6433. Any attempts to make unauthorized repairs will
void this warranty in every respect.
This warranty gives you specific legal rights. You may have other
rights which vary from state to state, however such implied
rights are limited to a period of one year from the date of your
initial purchase. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation may not
apply to you.
Interion will in no event be liable for incidental or consequential
damages for any amount in excess of the original purchase
price. Some states do not allow exclusion or limitation of such
damages, so the above limitation or exclusion may not apply to
you.
MARCH 2024