Advertisement
Quick Links
Assembly instructions
for the exhibition stand I106
constisting of:
- 6x Aluminium profiles à 1250 mm incl. 8 bores
- 6x Aluminium profiles à 1250 mm incl. 8 bores and adjustable feet
- 2x Aluminium profiles à 300 mm incl. 8 bores for fascia sign frame
- 10x Aluminium cross profiles with pointed screws for the lower and upper mounting
- 6x Aluminium cross profiles with pointed screws for fascia sign frame
- 20x H-profiles à 1217mm to stabilize the panels.
- 6x Extension bolts for aluminium profile
- 3x Longarm spothlights 450mm incl. bulb
6x
10x
6x
6x
6x
3x
System
exhibition
2x
20x
®
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for IRUS I106
Summary of Contents for IRUS I106
- Page 1 Assembly instructions System ® for the exhibition stand I106 exhibition constisting of: - 6x Aluminium profiles à 1250 mm incl. 8 bores - 6x Aluminium profiles à 1250 mm incl. 8 bores and adjustable feet - 2x Aluminium profiles à 300 mm incl. 8 bores for fascia sign frame...
- Page 2 System ® exhibition Important Pointed screws must be used for all profiles with screw holes. 1. Mount the bottom cross profiles 2. Push the top profiles onto the including the pointed screws to bolts. Ensure that the holes face form the corner and insert the bolts upward.
- Page 3 System ® exhibition 5. Insert the bolts in the profile and 6. Then mount the cross profiles push the top profiles onto the bolts. including the pointed screws. Ensure that the holes face upward. 8. Fully assembled exhibition stand. 7. Then mount the fascia If necessary, use the adjustable feet sign frame to compensate for unevenness in the floor.
Need help?
Do you have a question about the I106 and is the answer not in the manual?
Questions and answers