Advertisement
Table of Contents
Assembly instructions
for the exhibition stand I114
constisting of:
- 8x Aluminium profiles à 1250 mm incl. 8 bores
- 8x Aluminium profiles à 1250 mm incl. 8 bores and adjustable feet
- 2x Aluminium profiles à 300 mm incl. 8 bores for fascia sign frame
- 14x Aluminium cross profiles with pointed screws for the lower and upper mounting
- 6x Aluminium cross profiles with pointed screws for fascia sign frame
- 28x H-profiles à 1217mm to stabilize the panels.
- 8x Extension bolts for aluminium profile
- 3x Longarm spothlights 450mm incl. bulb
8x
14x
8x
8x
6x
3x
System
exhibition
2x
28x
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for IRUS I114
Summary of Contents for IRUS I114
- Page 1 System ® Assembly instructions exhibition for the exhibition stand I114 constisting of: - 8x Aluminium profiles à 1250 mm incl. 8 bores - 8x Aluminium profiles à 1250 mm incl. 8 bores and adjustable feet - 2x Aluminium profiles à 300 mm incl. 8 bores for fascia sign frame...
- Page 2 System ® exhibition Important Pointed screws must be used for all profiles with screw holes. 1. Mount the bottom cross profiles 2. Push the top profiles onto the including the pointed screws to bolts. Ensure that the holes face form the corner and insert the bolts upward.
- Page 3 System ® exhibition 5. Insert the bolts in the profile and 6. Then mount the cross profiles push the top profiles onto the bolts. including the pointed screws. Ensure that the holes face upward. 8. Fully assembled exhibition stand. 7. Then mount the fascia If necessary, use the adjustable feet sign frame to compensate for unevenness in the floor.
Need help?
Do you have a question about the I114 and is the answer not in the manual?
Questions and answers