Advertisement
Quick Links
assembly instructions
for the exhibition stand I109
constisting of:
- 8x Aluminium profile à 1250 mm incl. bores
- 8x Aluminium profile à 1250 mm incl. adjustable foot and bores
- 14x Aluminium cross profile with pointed screws for the lower and upper mounting
- 7x Aluminium cross profile for the middle mounting
- 28x H-Profiles à 1200mm to stabilize the panels
- 14x PVC foam boards à 952 x 1212 mm
- 8x Extension bolt for aluminium profile
- 3x longarm lighting 450mm incl. replacement bulb
8x
28x
8x
14x
System
14x
8x
®
exhibition
7x
3x
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for IRUS I109
Summary of Contents for IRUS I109
- Page 1 System ® for the exhibition stand I109 exhibition constisting of: - 8x Aluminium profile à 1250 mm incl. bores - 8x Aluminium profile à 1250 mm incl. adjustable foot and bores - 14x Aluminium cross profile with pointed screws for the lower and upper mounting - 7x Aluminium cross profile for the middle mounting - 28x H-Profiles à...
- Page 2 System ® exhibition Important during assembly Pointed screws must be used for all profiles that have holes. 1. Mounting the lower area of the 2. Insert the panels with the H-profiles corner with the aluminium cross one after the other and mount them profile incl.
- Page 3 System ® exhibition 6. Slide the upper profiles over the 5. Insert the extension bolts into extension bolts. Make sure that the profile. the boreholes are upwards. 8. Fully assembled exhibition stand. 7. Insert the upper panels with the If necessary, compensate for H-profiles one after the other and mount uneven floors with the leveling feet.
Need help?
Do you have a question about the I109 and is the answer not in the manual?
Questions and answers