The NETGEAR Managed Layer 2 Switch is a state-of-the-art, high-performance, IEEE-compliant
network solution. It includes powerful management features that you can use to eliminate
bottlenecks, boost performance, and increase productivity.
This guide describes the ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726. The
switch can be free-standing, or rack-mounted in a wiring closet or an equipment room. For
information about features for each product, see the NETGEAR website at
http://www.netgear.com.
Front Panel and LEDs
The following figure shows the front panel of the switch chassis. It contains LEDs, RJ-45 jacks,
and SFP module bays.
LEDs
Reset
Figure 1
v1.0, July 2009
Chapter 1
Introduction
copper/fiber
RJ-45 jacks
combo ports
1-1