Table of Contents
Advertisement
Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726 Hardware Installation Guide
SFP Modules
The module bay accommodates a standard SFP module with an LC connector that is compatible
with the IEEE 802.3z 1000BASE-X standard. SFP modules are sold separately. To install an SFP
module insert the SFP module into the module bay. Press firmly to ensure that the module seats
into the connector.
Figure 2-2
Connecting Equipment to the Switch
You can connect devices, an SPF Gigabit Ethernet module, and a console to the switch.
RJ-45 Ports
The switch uses Auto Uplink technology, which enables you to attach devices using either
straight-through or crossover cables. Use a Category 5 (Cat5) unshielded twisted-pair (UTP) cable
terminated with an RJ-45 connector.
Note: Ethernet specifications limit the cable length between the switch and the attached
device to 328 feet (100 meters).
2-6
Hardware Installation
v1.0, July 2009
Advertisement
Table of Contents
Troubleshooting
