Table of Contents
Advertisement
Operating Precautions
Multi PJ Startup Mode Precautions
PJ Camera Software has two startup modes: Multi PJ and Business Document. Note the following
precautions whenever starting up in the Multi PJ startup mode.
The table below shows the recommended setup for each type of subject recorded in the
Document Camera Mode and Scanner Mode.
* The initial default setup is the one shown for "A4 (210 × 297mm) (8.3 × 11.7inch)
Document".
Operation Bar
Recording Condition
Subject
A4 (210 × 297mm)
(8.3 × 11.7inch) Document
Newspaper
Business Card
Large Object
Small Object
ON
: Recording condition setting on (button depressed)
OFF : Recording condition setting off
–
: Recording condition setting not available (dimmed)
If you cannot achieve proper recording while
When performing a Board Area Capture operation, adjust the zoom setting so the board fills the
camera's field of view.
When performing a Projection Area Capture operation, adjust the zoom setting so the projected
image fills the camera's field of view.
All of the images in PJ Camera memory when you created a Camera Image Mode playlist must
be present in PJ Camera memory for the playlist to operate correctly. This is true even if the
deleted image is not included in the playlist. If one or more image has been deleted from PJ
Camera memory, question marks(?) will appear in place of some image thumbnails in the
playlist. If this happens, make a new Camera Image Mode playlist.
E-8
Settings
ON
OFF
ON
–
–
OFF
OFF
ON
OFF
ON
is turned on, try turning
Recording Condition
Settings
OFF
OFF
OFF
ON
ON
off.
Advertisement
Table of Contents
